Re: [linux-audio-user] Edirol UA-25: Any issues?

Hello there.. I'm also interested in this device, and some of the reading I've done will allow me to answer a couple of your questions.. hopefully the answers might even not be completely wrong :) I think the phantom power is supplied at a few milliamps, hence not much power is needed, just a resistor with the right value, since V=IR, right? (Correction welcomed from actual EE's :) If you read what I did, ( http://music.columbia.edu/pipermail/linux-audio-user/2005-October/027689.ht… ) the hiss was from the components inside the unit, not on the input channels, I think. Comments about the sound quality I've seen have been positive. I'm pretty sure you can only run two output channels (or 1 stereo) at one time, that is I think you'll get only 2 ports in alsa. I'm not sure whether the different physical output ports on the device run simultaneously, but it would seem strange not to. Don't know about the digital output, though. "half duplex", either in or out, at 96KHz. I gather from the downloadable manual that it will only do 16/44.1 with advanced mode switched to off, and only 24bits with advanced mode on, at least under windows. I'd be interested to know whether 16/48 could be achieved under Linux, despite this (ie if it's a limitation of the windows drivers). A user on this list reported latencies around 5ms a few months ago http://lalists.stanford.edu/lau/2005/07/1233.html If ua-25 owners that happen to read this could make an entry at http://www.qbik.ch/usb/devices/ it would be very helpful! Now, not to hijack your thread, or anything, ... but ... ;) I've also been looking at the UR-80 - which has similar features to the UA-25, minus the limiters and the loopback feature, but with a 43-control midi controller interface added (they are very cheap at one online store I've looked at, about the same price as the UA-25, which seems a good deal). Clemens Ladisch was helping someone get this going, but (from looking at the archives) the attempt fizzled out when a request to provide lsusb -v output at the different settings went unanswered (sort of). I'd guess it could be made to work. Apparently there is an alsa patch especially for it, but I don't know if that means the controller stuff will work, and how much of it. Any info on this device under Linux would be very interesting to me. Also any info on ua-25 alternatives, as in my (unanswered (sob) ) post of a few days ago.. Cheers, - Pete.