17 Dec
2019
17 Dec
'19
12:32 p.m.
hi,
still concerned with the issue that zita-a2j doesn't work properly on
my computers (I’ve also tried it with another machine, both run arch
linux) I enabled zita-a2j in verbose mode which tells me:
playback : not enabled
capture :
nchan : 2
fsamp : 48000
fsize : 256
nfrag : 2
format : S16_LE
whilst "playback" is indicated to be disabled, "capture" lacks a
state,
at all.
could this be a useful hint for solving the problem?
I have uninstalled zita-ajbridge, restartet and reinstalled, but the
problem persists.
by the way, I tried also if playback works (zita-j2a), but in the same
manner it doesn't, i. e. zita-j2a shows up in jack’s graph and in the
daw, but there is no signal.
thanks in advance for any suggestion.
christoph
Am Montag, den 16.12.2019, 19:28 +0100 schrieb
soffioalcuore(a)posteo.net:
dear Len, thanks for replying!
Am Montag, den 16.12.2019, 08:18 -0800 schrieb Len Ovens:
exactly, that there's a signal (physically) incoming is indicated in
the 2nd device (and also in the 1st, as usual) but not in the daw, i.
e. its meters (but in the 1st). if I record from both devices, only
1st/master device's tracks have the signals/content, but the tracks
of
the 2nd/slave device are empty.
On Mon, 16 Dec 2019, soffioalcuore(a)posteo.net
wrote:
no, # was just to identify the following as code/terminal output.
sorry
for the confusion, now I'm aware I should better use $ for that.
#zita-a2j -d hw:H4 -r 48000 -p 512 -n 2
does the # mean you are running things as root? Jack and zita
should
only
ever be run as a regular user and never as root/system. and I can
see the zita-bridge both in the graph window of
qjackctl
and
in my daw (reaper).
the problem is that I don't get any signal from the device
connected by
the zita-bridge. I have also tried to change both devices -
without
success. furthermore, I've tried to leave some of the parameters
(-p
and -n) out.
By no signal you mean there is a mic on the input but the audio
does
not
show up? (The meters on the device itself show level?) Does the signal ever show up on each device A)
when not running
jack?
B)
as the sole jack master?
a) yes, they normally do.
b) yes.
Is the device you are using as jack master also
the device you are
using
for monitoring? (output to speakers/heagphones?)
yes, by now, the master device is, as usual, the monitoring device.
for
the moment I'm just focussing on the inputs.
--
Len Ovens
www.ovenwerks.net
I hope that helps. thanks again!
christoph
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
https://lists.linuxaudio.org/listinfo/linux-audio-user