29 Apr
2014
29 Apr
'14
8:27 p.m.
On Tue, Apr 29, 2014 at 05:57:31PM +0200, Robin Gareus wrote:
On 04/29/2014 03:59 PM, Fons Adriaensen wrote:
For a UA25 you'd need a soldering iron to remove the pots
and replace them by fixed resistors :-)
The older UA5 (which I will bring) has an advantage in having
line inputs (on the back) that bypass the mic preamp. They have
a gain control, but it's just a passive pot which you can safely
turn to maximum. All this was removed on later models to make
place for MIDI connectors...
Ciao,
--
FA
A world of exhaustive, reliable metadata would be an utopia.
It's also a pipe-dream, founded on self-delusion, nerd hubris
and hysterically inflated market opportunities. (Cory Doctorow)
If you attend the workshop you can bring your
laptop
and audio interface [*] and have it calibrated against
a precision RMS meter so you can later use it to
measure other things.
very nice! Will there be pliers and hotglue or similar crazy-glue
available so that one can permanently fix the dials of the soundcard in
question? I'm planning to bring a UA-25.