29 Nov
2006
29 Nov
'06
12:28 p.m.
hi georg,
On Wed, 2006-11-29 at 14:30 +0100, Georg Holzmann wrote:
Hallo!
When I don't have plugged in my RME at bootup, I have sometimes the
problem, that hdsploader is not able to upload the firmware onto the device:
holzi@holzi:~$ hdsploader
hdsploader - firmware loader for RME Hammerfall DSP cards
Looking for HDSP + Multiface or Digiface cards :
Card 0 : RME Hammerfall DSP at 0x34000000, irq 9
Upload firmware for card hw:0
Hwdep ioctl error on card hw:0 : Input/output error.
Card 1 : Intel 82801DB-ICH4 Modem at 0x2400, irq 9
I searched a little bit and found this tip from Esben:
http://lalists.stanford.edu/lau/2006/05/0436.html - which also works for
me ...
So my question, is there also a way to get hdsploader working without
plugging out/in the card ? (and without a reboot)
my procedure is usually unloading the snd-hdsp module and modprobing it
again. sometimes i have to unplug the firewire cable while unloading the
module ...
i didn't ran hdsploader for quite some time, though
cheers ... tim
--
tim(a)klingt.org ICQ: 96771783
http://www.mokabar.tk
There's no such entity as "most people". These are generalities. All
generalities are meaningless. You've got to pin it down to a specific
person doing a specific thing at a specific time and space.
William S. Burroughs