21 Jun
2006
21 Jun
'06
1:50 p.m.
--- Paul Davis <paul(a)linuxaudiosystems.com> wrote:
[...]
Ah, I see. Thanks for the explanation.
Ok, I'll do that when I get home tonight. I noticed ecasound
doesn't show up in qjackctl's connection window until I
start it playing... then, after it's playing, I can set up
connections. Wonder if there's a way to set up those connections
before I start the playing?
On the pre-fader mixer input channel meters in the AW4416.
Likely you don't really care too much about the esoteric
workings of the AW4416, but in case you do, there is
a pdf here which is not too bad.
http://www.yamaha-europe.com/yamaha_europe/download/products/20_proaudio/mu…
ugh, big url... http://tinyurl.com/px3ot
(well, the block diagram at the end cuts off the left hand side,
which is unfortunate, as this is where the input meters are
shown.) Anyway, on page 3 of that pdf, where it says
"If you select F1 [1-24/RTN] you can see the meter array for
all 24 possible inputs..." That is the screen I'm looking at.
I have the 8 inputs of the Yamaha ADAT interface assigned
to mixer channels 17-24, so expect to see something on the
meters for those channels when I get all this working.
-- steve
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
The
"input channels: 0" and "output channels: 0"
seem suspicious. If I try to change them Jack
won't start and says: "ALSA: cannot set channel
count to 1 for capture" If I leave them zero, jack
will start (but I don't know if that's right.)
its correct. qjackctl could do a better job of presenting the idea that
"zero = use however many channels the hardware offers". Then in qjackctl, I can see ecasound in the
"capture" column,
and I routed it to every single output (all 18 of them --
presumably 2 s/pdif outs + 16 ADAT outs.) So I am seeing
the hammerfall having 18 ports, which is encouraging
please jack_lsp -c and post the results here, that way we can see
precisely what connections you have set up. I got nothing on the AW4416 where I would expect
the sound
from the wav file to show up on all 8 ADAT inputs.
and where do you expect them to show up?