oh!
BTW those last time we tried to support Tascam it was a nightmare... have
not gone back to the nightmare.
For the record the zoom H products work and you can modify one for 4 input.
thnx
ron
On Sun, Jan 30, 2011 at 4:15 PM, Q <lists(a)quirq.ukfsn.org> wrote:
Julien Claassen wrote:
Hello Massy!
I have a Delta and I suspect they will use most of their elements in the
USB cards as well. I'm not sure about phantom powered input, but the preamps
are good, my 16bit/48kHz works perfectly and the converters are good.
We compared the preamps with those in a roaldn/Bos BR1180CD, which is a
harddisk-recorder. I think they will use different preamps now, but if not:
The delta mic-preamps were much better than the boss ones.
that's unfortunately all I can say and guess about it. I know, that a
friend of mine has a fasttrack and has been running it for quite some time
without hitches.
Kind regards
Julien (the Namite :-) )
I'm by no means an expert on this, but from what I've read you should not
make any assumptions about USB sound cards based on similar devices,
possibly based on similar chipsets, that are PCI devices. Whilst chipsets
may be the same, there can be problems relating to transmission of data over
USB when it comes to USB2.
I do have an M-Audio FastTrack Pro which I bought for use with a netbook,
but ultimately I've never actually used it as a USB soundcard so can't
comment about that. I just use it as a pair of pre-amps into the analogue
inputs of my M-Audiophile 24/96 for my synths (I use the SPDIF
inputs/outputs with offboard ADC/DAC for mic input/monitoring).
I think I recall from when I was researching USB soundcards that the
FastTrack works okay, providing you don't expect high throughput, in other
words it works fine for USB1 but not USB2: according to the ALSA wiki the
FastTrack Pro only has a reduced channel count at anything greater than
16/48. But I'm only going by what I recollect reading, not by experience.
From experience, I would agree with Ronald about the FastTrack Pro's
pre-amps -- they're noisy as hell (but I've never had the other one to
compare, I'm going against my Focusrite TwinTrack pre-amps). Most of my
synths are fine running through it as the S/N ratio is pretty good: but with
my string synth (a late 70s Logan String Melody II which seems to have a
pretty low output) I have to crank the gain quite a bit and the noise is
pretty bad.
I seem to recall reading that you have to be careful as there is a US122
and a US122L and they are VERY different beasts which should not be
confused.
Hope this helps.
Q
--
A musical collaborator: "Lethargy, hm really? Then it will be time for me
to get over there and just accidental idea the $h!t out of you"
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-user