14 Nov
2019
14 Nov
'19
2:22 a.m.
On Wed, 13 Nov 2019, Giso Grimm wrote:
Sorry, I misread. I think that because there is an indeterminite amount of
time between jack opening one device and zita-ajbridge opening the second,
the interrupts can not happen at the same time. In this case creating a
multi device and opening the whole thing as jack's master device would be
the only way. See http://jrigg.co.uk/linuxaudio/ice1712multi.html for an
example.
--
Len Ovens
www.ovenwerks.net
> we are
running a setup with two RME MADI cards to drive a system with
> approx. 100 playback channels. We are using jack2 and zita-j2a to
> achieve a sufficient number of playback channels. The sample clocks are
no, PCIe (and RME MADI hdspe cards are far from being budget - although
quite cheep compared to over 100 loudspeakers and corresponding
DA-converters :-) ). Sample clock sync works perfectly.