16 Feb
2013
16 Feb
'13
3:05 a.m.
i have that card. i use envy24control to manage it. alsamixer will
manage it as well. does pavucontrol manage it at the hardware layer, or
does it manage the pulse audio connection layer?
kelly
On 02/15/13 19:37, jonetsu(a)teksavvy.com wrote:
Le 15-02-2013 19:03, Len Ovens a écrit :
Do you have the analog levels turned up (the
ice1712 driver seems to
default to lowest level in pulseaudio)? Also remember that your ice1712
might be hw:1 and not hw:0 if you also have an internal audio IF. In
pavucontrol (assuming pulseaudio is the default audio server) you
need to
select you d1010 as the default output or turn the internal audio right
off. So if pavucontrol shows audio going to the d1010, look at mudita in
the aualog tab and turn up at least DAC 1 and DAC 2 (ADC1 and 2 for
recording).
OK. first of all, pavucontrol was not installed (which is a Good
Thing since I like lean Linux distros). So I installed it. In the
attached screen shot, the blue bar is the output of vlc playing an
audio track. I must say that I'm not familiar at all with
pavucontrol, since I never used it before, in all those years I used
audio in fedora (both playing audio files and recording with Ardour).
I've tried a few things, but all controls in mudita24 shows '(off)'.
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-user