6 Nov
2012
6 Nov
'12
2:36 a.m.
Len Ovens wrote
Do you have the Patchbay/Router tab? Does it show 10
outputs?
(my d66 shows outputs 1-4 and 9-10) but I found I got no output till
I raised the analog controls either.
Another program to try for trouble shooting is qasHctl which gives a list
of everything ALSA found for your card in a tree like structure. On the
right side select hw:Card and 0: or whatever card number you are using. On
the left side under mixer see what is listed there. Anything with "multi
Capture" or "multi Playback" in it is the monitor mixer. Look for other
sets of 10.
Len
Using mudita24, I have the Patchbay / Router tab. It shows 8 H/W OUT
columns (1-8) and two S/PDIF Out Columns (L)and (R). Nothing in mudita24 is
labeled "multi Playback".
Using qasHctl, I do see a set of 8 controls called
- HW Multi Capture Switch[8] (buttons all set to ch 0.)
- HW Multi Capture Volume[8] (sliders all set at 80)
Using QasMixer , I see the following channel sliders on the input screen
(when I select the picture of mic)
2 Sliders Labeled: IEC958 Multi, 0 - IEC958 Multi, 1
1 Slider Labeled: Capture
8 Sliders Labeled: H/W Multi,0 - H/W Multi,7
1 Slider Labeled: Multi Track Volume
All are turned on and up.
Cullen
--
View this message in context:
http://linux-audio.4202.n7.nabble.com/Envy24Control-is-missing-the-Analog-V…
Sent from the linux-audio-user mailing list archive at Nabble.com.