28 Aug
2016
28 Aug
'16
12:06 a.m.
On Sat, 27 Aug 2016 06:11:22 +0200
William Light <wrl(a)illest.net> wrote:
I run the tubes in high-voltage mode all the time and
generally crank
the gain up until whatever I'm recording is just saturating. Even
then, the VU meters are so slow that I barely notice them unless I'm
doing a lot of really steady tones. For something like acoustic
guitar, the meters not moving sounds just about right.
Just tried it with the acoustic bass guitar. The sound is very nice,
and with only using one AT2050 in cardiod mode at that. I will try the
mid/side thing eventually.
Still wonder what the purpose of the VU meters is. The owner's manual
mentions:
"Use the analog meter to view the operating level by depressing the
switch under the center of the analog meter."
But there's no such switch.
Replacing the tubes is not a priority for now although thanks for
mentioning it, will try it later.
Can always turn the gain up. ;)
The colours that can be extracted from instruments is amazing.
Cheers.