10 Nov
2010
10 Nov
'10
11:08 a.m.
On Tue, Nov 09, 2010 at 11:43:09PM -0800, Ken Restivo wrote:
Question about the alsa_out tool in the JACK github.
How critical is the libresample portion of the code? What would happen if I removed it?
i.e. if I were sending, say, one stereo pair to one amp, and another stereo pair to a
different amp, and didn't care about the word clocks being in sync, do I really need
that libresample stuff sucking up valuable CPU? Or could I whack it? What would be the
difficulties created by doing that? Again, this'd be only for output channels and I
wouldn't need the word clocks to be in sync.
you are confusing things here.
its not about wordclocks being in sync. if your wordclocks are in sync.
you dont need alsa_out.
but most likely your wordclocks are not in sync. this means your
soundcards run at different drifing samplerates, and one soundcard will
consume a different amount of samples per jack cycle. but jack is
feeding period samples each cycle.
first try using -q option set to 0 because that will use linear resampling.
reducing the value of the -s option (default 256) will also improve cpu usage.
but might yield worse performance of the algorithm. it depends a bit on
the soundcards you are using.
--
torben Hohn