1 Feb
2014
1 Feb
'14
7:14 p.m.
* Jörn Nettingsmeier <nettings(a)stackingdwarves.net> [2014-02-01 15:37]:
On 02/01/2014 01:00 AM, Peter P. wrote:
oh, rather conservative Debian testing under
3.2.0-4-rt-amd64
But the hdsploader code is really old anyway.
best, P
Hi list,
hdsploader (via hotplug) on my box seems to load firmware at will.
Sometimes it loads the Digiface firmware into my Multiface, sometimes
it loads the correct one.
I suppose I could simply delete the digiface firmware from the path,
but what is it that makes it load the wrong one?
correct one:
kernel: [98033.160982] pci 0000:05:00.0: BAR 0: assigned [mem 0xf0000000-0xf000ffff]
kernel: [98033.161012] pci 0000:05:00.0: no hotplug settings from platform
kernel: [98033.161264] snd_hdsp 0000:05:00.0: enabling device (0000 -> 0002)
kernel: [98033.467674] Hammerfall-DSP: wait for FIFO status <= 0 failed after 30
iterations
kernel: [98033.474630] snd_hdsp 0000:05:00.0: firmware: agent loaded
multiface_firmware_rev11.bin into memory
wrong one:
kernel: [98146.327251] Hammerfall-DSP: loading firmware
kernel: [98149.392459] Hammerfall-DSP: finished firmware loading
kernel: [98243.384790] pci 0000:05:00.0: BAR 0: assigned [mem 0xf0000000-0xf000ffff]
kernel: [98243.384824] pci 0000:05:00.0: no hotplug settings from platform
kernel: [98243.385118] snd_hdsp 0000:05:00.0: enabling device (0000 -> 0002)
kernel: [98243.689751] snd_hdsp 0000:05:00.0: firmware: agent loaded
digiface_firmware_rev11.bin into memory
Does someone else have the same issue?
not yet, but i haven't used the card in two weeks.
which kernel, which distro?