10 Aug
2006
10 Aug
'06
2:25 p.m.
If the soundcard preamp are good enough and your soundcard has an HI-Z
switch (my Edirol UA-25 has both) I would remove even the mixing console
from your setup.
The best results are achieved with a clean unprocessed signal (don't
even eq it) to be captured by the soundcard, and then applying digital
effects inside the DAW.
If your soundcard can record at 24bit and you store your WAVs at this
resolution you can even go without a compressor/limiter before entering
the soundcard. 24bit resolution is enough to preserve dynamics even if
you record at a safe level and then compress your track digitally.
If the soundcard latency is low enough you can even listen to the
processed signal (like some compression, for the bass) while recording
(Ardour for instance can do that).
Just my thoughts,
c.
Jean-Baptiste Mestelan wrote:
I wondered if I such a DI box would make sense in my
recording setup :
bass ---> mixing console ---> soundcard
How useful would it be to insert a DI ?
bass ---> DI --> mixing console ---> soundcard
A guitarist friend of mine has tried to convince me so, but I did not
exactly grasp the whole argument ... I would have thought that the
console already serves as a preamp, but I may miss some point ?
Thanks for advice.
On 8/10/06, Paul Coccoli <pcoccoli(a)gmail.com> wrote:
--
www.cesaremarilungo.com
On the Internet, no one knows you're using Windows NT
-- Submitted by Ramiro Estrugo, restrugo(a)fateware.com
On 8/9/06, Paul Winkler
<pw_lists(a)slinkp.com> wrote:
On Wed, Aug 09, 2006 at 12:37:16PM -0400, Paul
Coccoli wrote:
Hmm, I hadn't heard that. I've never actually played one.
If I had the money, I'd get a SansAmp Bass
Driver DI. People on
talkbass.com rave about it. You need a mic pre (with headphone jack
in you case) though, as it has an XLR mic output.
OTOH, having been a bassist for about 25 years now,
I can't stand the SansAmp BDDI. It's not a very "neutral" device -
it has a strong personality, it scoops out vast amounts of
midrange no matter what you do with the tone controls.
For my taste, that is totally wrong.
Lots of people like it... poor lost souls :)
For going DI, I prefer a decent passive DI followed by
tweaking with plugins if necessary. SC4 is very handy; so is the
10-band EQ
(I forget which suite that comes from). I also
sometimes use
the "tube warmth" or whatever it's called.
I use the DIs in my cheapo M-Audio Audio Buddy. They sound ok to me,
and I like cheap stuff. The CAPS tube amp sims sound ok on bass, but
probably need low-pass filters (or EQ) after them.
I really prefer micing the amp, but I recognize
that's not
always doable.
--
Paul Winkler
http://www.slinkp.com