13 Oct
2005
13 Oct
'05
4:36 p.m.
On Thu, 13 Oct 2005 19:58:01 +0200
Lazzaro Nicolò Ciccolella <ciccolix(a)tiscalinet.it> wrote:
I am not able to configure the bca2000 under linux.
Although I loaded the module "snd-usb-audio" the only card that comes
seen is the intel motherboard integrated card.
The BCA isn't listed with lsusb, so it hasn't been seen by the system.
Have you power-cycled it after Linux has booted? I find I have to do
that pretty frequently, usually just after I start jack.
I don't know what application you want to use the BCA with, but the
Wiki entry at http://ardour.org/manual/using_a_bcf2000 has some helpful
hints on connecting a BCF/BCA even if you're not using Ardour.
--
======================================================================
Joe Hartley - UNIX/network Consultant - jh(a)brainiac.com
Without deviation from the norm, "progress" is not possible. - FZappa