29 Oct
2010
29 Oct
'10
2:41 p.m.
On Fri, Oct 29, 2010 at 4:34 PM, torbenh <torbenh(a)gmx.de> wrote:
On Fri, Oct 29, 2010 at 05:08:03AM +0200, Robin Gareus
wrote:
Torben, works here, with jack1 0.120 (SVN) gentoo 64bit.
Thanks for the update.
Regards,
Alex.
--
www.openoctave.org
midi-subscribe(a)openoctave.org
development-subscribe(a)openoctave.org
On 10/29/10 05:00, Paul Davis wrote:
like paul said. you didnt change the default device.
use:
mplayer -ao alsa:device=jack
or
mplayer -ao alsa:device=jack=mplayer
On Thu, Oct 28, 2010 at 10:47 PM, Robin Gareus
<robin(a)gareus.org> wrote:
I hazard a guess that it's just mplayer with a misleading error message. ..but I could not get your .asoundrc working. It
fails with
[AO_ALSA] alsa-lib: pcm_hw.c:1293:(snd_pcm_hw_open) open
'/dev/snd/pcmC0D0p' failed (-16): Device or resource busy
you're not opening the JACK device, clearly - this message references
/dev/snd/pcmC0D0p
I prefixed torben's config with
pcm.!default {
type plug
slave { pcm "jack" }
}
and once I remove the
type plug
slave { pcm {
from Torben's config and directly use "type jack" without any
'slaves'
it works just fine.
this wraps a plug device in another plug device.
i actually dont know how smart this is ;)
i have
pcm.!default jack:alsa-default
it will only work fine for the default. the jack plug it self, is not
very flexible, and many clients would complain that they dont do float
and fixed SR...
robin
--
torben Hohn
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-user