16 Jun
2009
16 Jun
'09
11:24 a.m.
hey,
just trying this method of compiling rt kernel....
i seem to be getting up to compile time
( ie time fakeroot make-kpkg --initrd -rev mz1 kernel_image kernel_headers
kernel_source )
and it all looks good til this error....
could someone help?
CC arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.o
LD arch/x86/kernel/cpu/cpufreq/built-in.o
CC arch/x86/kernel/cpu/mtrr/main.o
CC arch/x86/kernel/cpu/mtrr/if.o
CC arch/x86/kernel/cpu/mtrr/generic.o
arch/x86/kernel/cpu/mtrr/generic.c:311: error: redefinition of ‘mtrr_debug’
arch/x86/kernel/cpu/mtrr/generic.c:38: error: previous definition of
‘mtrr_debug’ was here
arch/x86/kernel/cpu/mtrr/generic.c:316: error: redefinition of
‘__setup_str_mtrr_debug’
arch/x86/kernel/cpu/mtrr/generic.c:42: error: previous definition of
‘__setup_str_mtrr_debug’ was here
arch/x86/kernel/cpu/mtrr/generic.c:316: error: redefinition of
‘__setup_mtrr_debug’
arch/x86/kernel/cpu/mtrr/generic.c:42: error: previous definition of
‘__setup_mtrr_debug’ was here
make[4]: *** [arch/x86/kernel/cpu/mtrr/generic.o] Error 1
make[3]: *** [arch/x86/kernel/cpu/mtrr] Error 2
make[2]: *** [arch/x86/kernel/cpu] Error 2
make[1]: *** [arch/x86/kernel] Error 2
make[1]: Leaving directory `/home/tom/kernel/linux-2.6.29-source-rt'
make: *** [debian/stamp/build/kernel] Error 2
real 1m19.333s
user 0m50.659s
sys 0m12.893s
On Tue, Jun 2, 2009 at 4:51 AM, nescivi <nescivi(a)gmail.com> wrote:
On Monday 01 June 2009 14:04:33 Jan Weil wrote:
Just call make-kpkg again as before, something like
fakeroot make-kpkg --initrd --revision XYZ kernel_image
The kernel Makefile will catch your changes and only recompile what is
needed. If I understand correctly, the debian sub-directory will be
recreated on the fly. It should be safe to remove it, though, if the
above does not work out. dpkg will yell out some warnings when you
install the newly built version as it is not able to determine new
module dependencies. In this case, just recompiling a single module,
there shouldn't be a problem.
ah, ok.
got it all built...
so now it's just seeing if it all works when I reboot...
got to go now though, so more later!
I updated my website/blog entry with the comments from this thread for
future
reference.
sincerely,
Marije
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
http://lists.linuxaudio.org/mailman/listinfo/linux-audio-user
On Mon, Jun 01, 2009 at 01:51:41PM -0400, nescivi
wrote:
> On Monday 01 June 2009 13:43:22 Jan Weil wrote:
> > On Mon, Jun 01, 2009 at 01:26:21PM -0400, nescivi wrote:
> > > On Monday 01 June 2009 11:16:35 Jan Weil wrote:
> > > > On Mon, Jun 01, 2009 at 11:03:49AM -0400, nescivi wrote:
> > > > > some more on this...
> > > > > I had a problem using my RME Multiface with this kernel... It
saw
> > > > > the PCMCIA card, but not
the device. Tried my basic 2.6.29
> > > > > kernel, that one had the same problem.
> > > > > 2.6.26 had no problem with it.
> > > >
> > > > yup, been there. Does this
> > > > <
http://www.nabble.com/kernel-2.6.29-rc6-no-working-rme-multiface-1
> > > >-td2 2280 851.html>
> > > > <http://article.gmane.org/gmane.linux.alsa.devel/60411> help?
> > >
> > > Probably :)
> > > I don't need to rebuild the whole kernel for this, right?
> >
> > Yes, if you built snd-hdsp as a module. Until recently, you would
have
had to call 'make-kpkg clean' after patching,
i.e., recompile the
entire kernel, which was a real PITA. Fortunately, this is no longer
needed. A long overdue change in my opinion.
So which command do I use?