1) If you've not already done so, recompile your
kernel with the PREEMPT flagrunning 2.6.14-rt22
2) change the PCI bus latency of your IEEE controller (let me insist: this may> be a
+real+ bottleneck; an evidence that you've got such a bottleneck there> is the
occurence of tons of "IEC61883C: possible raw1394 error" messages when> jackd
is running...).Thanks a lot for this hint. I had tons of such messages. Now, most are
gone.
("-n -20" sets the lower possible nice value for jackd).> This leads to
~11ms as reported by jdelay.Comfirmed. The bad thing is, sometimes delay increases with
each xrun,but it's purely freebob issues.
And if you're interested, I can send you my edirolFA66.xml; this avoids> running
the freebob daemon (in this case,I'd be very grateful, if you can.
Note also that i run everything as root. Surely, this is not good practice,I use rtlimits
Thank you a lot.You helped me to overcome my frustration.
Best regards,
Dmitry.