13 Sep
2005
13 Sep
'05
6:35 p.m.
On Mon, Sep 12, 2005 at 09:53:59PM +0200, Michael Wagner wrote:
On 9/11/05, Michael Rudolf <mich.rudolf(a)gmx.de>
wrote:
I can confirm this as well. It seems if the card is set to digital input
and no external digital device is connected it doesn't know what sample
rate it's supposed to use. Thanks for mentioning it Michael. I had
forgotten this detail.
You can set the control with alsamixer or rmedigicontrol from alsa-tools
as well as with the amixer command Michael posted.
--
Eric Dantan Rzewnicki | Systems Administrator
Technical Operations Division | Radio Free Asia
2025 M Street, NW | Washington, DC 20036 | 202-530-4900
CONFIDENTIAL COMMUNICATION
This e-mail message is intended only for the use of the addressee and
may contain information that is privileged and confidential. Any
unauthorized dissemination, distribution, or copying is strictly
prohibited. If you receive this transmission in error, please contact
network(a)rfa.org.
late driver wakeup: nframes to process = 7168.
delay of 106612.000 usecs exceeds estimated spare time of 21289.000;
restart ...
delay of 106612.000 usecs exceeds estimated spare time of 21289.000;
restart ...
delay of 106612.000 usecs exceeds estimated spare time of 21289.000;
restart ...
delay of 106612.000 usecs exceeds estimated spare time of 21289.000;
restart ...
Sorry, didn't read the whole thread, so apologies if this comment
is useless ;-)
I also run a rme96 Soundcard (The DIGI96/8 PST... got it for free ^_^)
and also had the problem, that I got xruns all the time. It turned
out, that I needed to activate the Analog Input in Alsa, when nothing
is connected to the digital Inputs!:
$ amixer cset numid=5 3
Well, my latency is still bad, but I didn't have enough time yet to
resolve it, and haven't done any recording with it yet... but at
least, this solved my xrun-Problem...