26 May
2003
26 May
'03
6:04 p.m.
Hi,
Sorry to flood all this into lau. Maybe it's not the
right list?
Anyway
crw-rw---- 1 root audio 116, 40 Dec 31
1969 midiC1D0
I'm using a capabilities patched kernel and running as
a regular user but my user is a listed member or audio
group:
audio::18:parker,studio
Well, that was just a hunch that doesn't seem to be
going anywhere. I'll sort that out later, got some
other work to do.
ron
--- R Parker <rtp405(a)yahoo.com> wrote:
Hi Clemens,
Just some added information. We connected a Kurzweil
K2000R to the 8x8 port 7 and are able to control
information going to that device. So the routing
aspects are working. It's just the /dev/snd/midiC1D0
file that's not happening.
ron
--- Clemens Ladisch <clemens(a)ladisch.de> wrote:
__________________________________
Do you Yahoo!?
The New Yahoo! Search - Faster. Easier. Bingo.
http://search.yahoo.com
R Parker wrote:
will
I still don't understand where the usb-midi
i/o
device is.
...
There's no messages passing through
/dev/snd/midiC1D0
This file handles all nine ports. The ALSA library
uses a magic IOCTL to
select the desired port; when you access the file
directly, you get the
first port only.
If possible, you should use a program that can
access MIDI ports via the
ALSA library (the 8x8's ports would be named
"hw:1,x", x = 0..8).
If you want to access other MIDI ports than the
first with a device file,
you have to load the snd-virmidi driver, which give you some virtual
MIDI ports, and to connect these ports to the
8x8's
ports with aconnect.
HTH
Clemens
__________________________________
Do you Yahoo!?
The New Yahoo! Search - Faster. Easier. Bingo.
http://search.yahoo.com