20 Mar
2003
20 Mar
'03
1:15 p.m.
John Ouzts wrote:
Thanks Patrick, here's what you asked for:
Module Size Used by Not tainted
snd-pcm-oss 39300 0 (autoclean)
snd-mixer-oss 13624 2 (autoclean) [snd-pcm-oss]
snd-via82xx 9356 0
snd-ac97-codec 31044 0 [snd-via82xx]
snd-mpu401-uart 3840 0 [snd-via82xx]
snd-rawmidi 15584 0 [snd-mpu401-uart]
snd-seq-device 4416 0 [snd-rawmidi]
snd-rme96 16396 2
snd-pcm 67936 0 [snd-pcm-oss snd-via82xx snd-rme96]
snd-timer 12840 0 [snd-pcm]
snd 31852 0 [snd-pcm-oss snd-mixer-oss snd-via82xx
snd-ac97-codec snd-mpu401-uart snd-rawmidi snd-seq-device snd-rme96 snd-pcm
snd-timer]
soundcore 3940 7 [snd]
ntfs 71148 2 (autoclean)
8139too 14728 1
sr_mod 12184 0 (unused)
sg 26124 0 (unused)
ide-scsi 7600 0
0 [PAD ]: Digi96 - RME Digi96/8 PAD
RME Digi96/8 PAD at 0xdd000000, irq 19
1 [8233AC ]: VIA8233 - VIA 8233A/C
VIA 8233A/C at 0xe400, irq 10
I have also discovered that kmix appears as a gray window without any sliders
or labels. Alsamixer shows one slider labelled DAC, which will adjust. I also
got an error message with says: Mixer device /dev/mixer is missing volume and
PCM controls.
Gentoo uses devfsd, so I am wondering if I need to set some devices in
devfsd.conf.
Thanks again, John
I just did a fresh Gentoo 1.4 install in a new
machine with an RME 96/8 PAD
card, which uses the rme96 driver. System sounds now come to my hifi system
through the rme card, so I think the driver is loading and working.
I cannot get Audacity or Ardour to record, however. Audacity works fine in
the
same machine when using the monopolist's operating system, however. Running
on that partition, Audacity finds 11 or 12 sound devices, the 8 RME
channels
and the builtin VIA sound chip devices. Under Linux, Audacity only finds
/dev/dsp, and sometimes not that.
How do I get Audacity to see other devices, or is that my problem?
John
This seems like a simple(tm) setup problem.
Can you send us the output of...
lsmod; cat /proc/asound/cards
That will give us an overview of your setup.