8 Mar
2004
8 Mar
'04
4:24 p.m.
hmm.. the M-Audio Delta 1010 is looking like a great deal in the end.
Matthew Polashek
Associate Editor, Silver Burdett Ginn - Music
Scott Foresman/Pearson Education
299 Jefferson Road
Parsippany, NJ 07054-0480
office: 973.739.8709
fax: 973.739.8098
Matthew.Polashek(a)scottforesman.com
----------
From: Mark Knecht
Reply To: A list for linux audio users
Sent: Monday, March 8, 2004 2:29 PM
To: A list for linux audio users
Subject: Re: [linux-audio-user] Good Sound Card for Pro Multitracking
Polashek, Matthew wrote:
****************************************************************************
This email may contain confidential material.
If you were not an intended recipient,
please notify the sender and delete all copies.
We may monitor email to and from our network.
****************************************************************************
I would simply prefer to be able to hit 96K. I
definitely need an
external
A/D/D/A unit for sound quality reasons. I can
probably use external mic
pre-amps. I have been considering using a Presonus DIGImaxLt with a RME
Hammerfall 9652 but I think it ends up being cheaper to get an outboard
box
with balanced ins and outs and throwing some kind
of 8 channel mic pre
in
front of it, unless there was a less expensive
ALSA compatible option
that
had 8 mic pres and 8 outs.
OK. Well, 8-10 inputs of 96K A/D is going to cost you, but I'd guess
your best bet under Linux is probably an RME card of some type, with one
of their external 96KHz D/As.
Look into the RME HDSP line. The low end of what might work for you
would be the HDSP MultiFace. I think the drivers for that work pretty
well.
Higher end I'd look at maybe a Hammerfall Light (Digi9636) With an ADI-8
Pro maybe. Good sound. Please double check that the ADI-8 Pro stills
supports the full 8 channels at 96KHz. It has enough ADAT interfaces to
do this but I'm finding the web page lacking on this fact.
You'd certainly have more choices sticking with 44.1/48K for lower cost
converters, but you sound interested in 96K so this limits your options
with RME cards anyway.
Don't get the stand alone HDSP9652 or HDSP9636 until you make sure the
Linux drivers will do what you need.
Good luck,
Mark