16 Feb
2006
16 Feb
'06
8:57 p.m.
Am Donnerstag 16 Februar 2006 15:53 schrieb Clemens Ladisch:
conrad berh?rster wrote:
buuuuuttttt: the default of aplay
is hw:0,0 . on my first card, the first
subdevice is an mono channel. so, what puzzles me is the fact, that
aplay test.wav is ok but aplay -D hw:0,0 test.wav gives me this error.
Does this mean, that aplay with the -D option first reads all the data and
only send the raw data to the subdevice.
i'm want to use the asoundrc for my music
production.
Why? What do you want to do that does not work with the default
configuration?
if i try
aplay test.wav
everything went fine. but after
aplay -D hw:0,0 test.wav
i get
Playing WAVE 'test.wav' : Signed 16 bit Little Endian, Rate 44100 Hz,
Mono aplay: set_params:901: Channels count non available
"hw" goes directly to the hardware, without automatic sample format
conversion. Your hardware cannot play mono data.
HTH
what means HTH ;=)
Clemens