[LAU] sndpeek

Anyone use sndpeek on gentoo? I'm on amd64 and it compiled fine. But, it doesn't want to start at all. Just Seg faults after printing the help # # sndpeek test.wav ---------------------------------------------------- sndpeek + wutrfall (1.3b) Ge Wang, Perry R. Cook, Ananya Misra http://soundlab.cs.princeton.edu/ ---------------------------------------------------- 'h' - print this help message 'p' - print current settings to console 's' - toggle fullscreen 'f' - freeze frame! (can still rotate/scale) '1' - toggle waveform display '2' - toggle lissajous display '3' - (also 'w') toggle wutrfall display '4' - toggle feature extraction (broken) 'd' - toggle dB plot for spectrum 'r' - toggle rainbow waterfall 'b' - toggle waterfall moving backwards/forwards 'x' - restart file playback (if applicable) 'p' - print current settings to terminal 'm' - mute 'j' - move spectrum + z 'k' - move spectrum - z 'u' - spacing more! 'i' - spacing less! L, R mouse button - rotate left or right '[', ']' - rotate up or down '-' - scale DOWN the spectrum '=' - scale UP the spectrum (shift)'-' - scale DOWN the waveform (shift)'=' - scale UP the waveform 'c' = LOWER log factor of spectrum display 'v' = RAISE log factor of spectrum display (log factor of 1.0 is linear display (shift)'c' - LOWER amount of viewable waveform (shift)'v' - RAISE amount of viewable waveform 'l' - scale DOWN the lissajous! 'L' - scale UP the lissajous! 'y' - decrease delay for lissajous plot 'Y' - increase delay for lissajous plot 'q' - quit ---------------------------------------------------- [sndpeek]: opening test.wav... [sndpeek]: setting sample rate to 48000 Segmentation fault It segfaults even with no args. -- Brad Fuller www.bradfuller.com