19 Dec
2018
19 Dec
'18
3:52 p.m.
Paul Davis:
It's bonanza time for anyone interested in some
RME gear for use with
"vintage" computers (defined as ones with a PCI bus. Yes, PCI. Not PCI(x)
or PCI(e) or other later variant. Just PCI).
What's available:
RME Hammerfall 9652
3x ADAT in/out
Daughterboard for word clock
Breakout cable for 9-pin Sony protocol & S/PDIF
Little-endian ROM chip installed, Big-endian enclosed
RME HDSP9652
3x ADAT in/out
(missing MIDI I/O breakout cable)
RME Digiface
half-height PCI card
External breakout box, 3x ADAT in/out, S/PDIF, MIDI, word clock
(nice long) Cable to connect
Bonus:
PCMCIA card for digiface, with required cable
2 x ADAT cables
...
Hello Paul, I have a:
http://www.thinkwiki.org/wiki/Category:T61p
and a PCMCIA card could suit me fine, but I don't know anything about
ADAT, and if I just need 4 mic or line in, and 4 line out, so this is
probably overkill, and I still need some analogue to ADAT converter.
Is this something that would be recommended or should I get something
else ?
I record the local choirs and such.
Regards,
/Karl Hammar
-----------------------------------------------------------------------
Aspö Data
Lilla Aspö 148
S-742 94 Östhammar
Sweden