4 Apr
2018
4 Apr
'18
5:55 p.m.
the most likely issue with low cost stereo DACs is clocking.
the one cited by chris has its own PLL which it claims replaces the need
for a master clock if ganging them together. somehow i doubt that the
cheaper ones even bother with this, let alone pins for a master clock.
On Wed, Apr 4, 2018 at 2:24 AM, Peter <list(a)schmitteckert.com> wrote:
Dear Chris,
Am 03.04.2018 um 20:34 schrieb Chris Chronopoulos:
i'm aware of ADAT, but the motivator here is
cost/scalability. most ADAT
interfaces are optimized for input with preamps, etc.
plus it's limited to
8 channels per link, so there's recurring overhead if you want to scale
higher.
imagine trying to do high channel count (e.g.
spatial audio) on a
budget. i'm not aware of any configuration that will get
you >16 channels
analog for <$1k.
An alternative would consist in low-cost I2S devices, like the Adafruit
I2S Stereo Decoder - UDA1334A.
I don't know anything about the sound quality, but it's a stereo DAC below
10€. I'm not sure how many
I2S devices you can plug at a raspberry. But since there are ALSA driver
available, this would would provide
a starting point to possibly connect several of those devices. This could
be a low budget route.
Presumably there are I2S DACs with more channels.
In addition, last December there was a thread on "recommendations for
output-only audio devices",
where a < https://www.minidsp.com/products/usb-audio-interface/u-dac8 >
was mentioned.
Best regards,
Peter
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
https://lists.linuxaudio.org/listinfo/linux-audio-user