11 Nov
2006
11 Nov
'06
1:57 p.m.
Are you loading the module with the "pnp=1" param?
Try re-removing both snd-mpu401 and snd-mpu401_uart as snd-mpu401_uart
You shouldn't need to manually load snd-mpu401_uart as it is being
loaded by snd-mpu401 itself.
Try removing both modules again, and then to just load snd-mpu401.
# modprobe snd-mpu401 pnp=1
and confirm it pulled in snd-mpu401_uart automatically:
# lsmod | grep mpu401
snd_mpu401 9640 0
snd_mpu401_uart 10240 1 snd_mpu401
<rest of the output omitted>
If you got troubles freeing up the midi devices try logging out and in
again, it might quicker.
good luck.
2006/11/11, Chip VanDan <chip.vandan(a)gmail.com>om>:
Well I can load snd-mpu401-uart, but it doesn't
seem to make a
difference to anything, I still don't have anything but Midi Through
to connect to in Jack.
When I try to load snd-mpu401 I get :
FATAL: Error inserting snd_mpu401
(/lib/modules/2.6.10-2.1.ll.rhfc3.ccrma/updates/drivers/mpu401/snd-mpu401.ko):
No such device
On 10/11/06, Clemens Ladisch <cladisch(a)fastmail.net> wrote:
The MIDI port is not accessed like a standard
serial port.
The module to use is snd-mpu401.