2 Sep
2020
2 Sep
'20
5:18 p.m.
As I said, it works fine in UbuntuStudio. lsusb shows it as an allen&heath,
etc.
But, on this debian box it shows up as a ZED in Qjackctl. (lsusb show the
same hex ID as on the Ubunut box, but no manufacturer string) But,
selecting it a starting jack results in 2 system captures and 2 system
playbacks shown in the Qjack Connections window. But, there is no audio,
for example with a mic plugged into the mixer and the capture routed to
meterbridge.
On Wed, Sep 2, 2020 at 9:02 AM Edgar Aichinger <edogawa(a)aon.at> wrote:
Am Mittwoch, 2. September 2020, 14:43:18 CEST schrieb
Mac:
I have installed a fresh Debian 10 and I have
Qjackctl installed.
Qjackctl shows the ZEDi8 (though lsusb does not see it as a ZED, I think
is
does on Ubuntu...)
But, I can't seem to get the config to actually get audio from the ZED,
it
appears to be using the onboard sound.
My web searches have not provided any help...
I don't know the ZEDi8, but I own an older and bigger ZED18 mixer, which
also provides a 2x2 USB interface. This never gave me any problem in any OS
or linux distro. It's hotpluggable/always detected by ALSA's USB Audio
Driver, and registers as hw:CODEC. lsusb shows it as some sort of Texas
Instrument audio interface, IIRC.
The data sheet for the ZEDi8 tells that the interface is USB 2.0
compliant, so in theory it should just work without additional drivers.
Hope that helps...
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
https://lists.linuxaudio.org/listinfo/linux-audio-user