7 Oct
2018
7 Oct
'18
11:38 a.m.
Hi,
This should work, and checking here it seems fine:
bjb@rowlf [3] zita-n2j --chan 1 $HOST 5000 --buff 65
Waiting for info packet...
bjb@rowlf [4] zita-n2j --chan 1 $HOST 5001 --buff 65
Waiting for info packet...
bjb@rowlf [6] jack_lsp |grep zita
zita-n2j:out_1
zita-n2j-01:out_1
bjb@rowlf [7] zita-n2j --version
zita-n2j-0.1.1
Stupid question first: are you sure you've nothing else running on port
5001? It's UDP, which might confuse you if you assume TCP.
bjb@rowlf [12] sudo lsof -n |grep 'UDP.*5001'
zita-n2j 11763 bjb 12u IPv4 245419447 0t0 UDP
192.168.100.21:5001
bjb
On Sat, Oct 06, 2018 at 10:01:13PM -0700, ahmethungari wrote:
Hi everyone,
I'm trying to set a single laptop to receive two different inputs over
network from two other computers. So, there are two sender computers and one
receiver. I'm trying to use zita-njbridge.
On sender computers I run
sender1 $ zita-j2n --chan 1 192.168.1.5 5000
sender2 $ zita-j2n --chan 1 192.168.1.5 5001
And on receiver computer I try to run
receiver $ zita-n2j --chan 1 192.168.1.5 5000 --buff 65
receiver $ zita-n2j --chan 1 192.168.1.5 5001 --buff 65
And the second zita-n2j comand gives an error
"Address already in use"
I thought having two different port numbers for different senders would
allow me to run zita-n2j twice on the same computer, but apparently I was
wrong. Is there any possibility to do so?
I can also accept zita-njbridge alternatives as an answer. All I want to do
is to receive two (or more) sources over network on a single computer and
then mix them.
--
Sent from: http://linux-audio.4202.n7.nabble.com/linux-audio-user-f5.html
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
https://lists.linuxaudio.org/listinfo/linux-audio-user