4 Oct
2005
4 Oct
'05
5:49 a.m.
Hallo,
Dave Phillips hat gesagt: // Dave Phillips wrote:
Nigel Henry wrote:
I've never used pump, but if you'd use dhcp (whose Debian package I
think conflicts with pump) you could instead manage the dhcp
configuration inside /etc/network/interfaces as well. Just replace
iface eth0 inet static
# ...
with
iface eth0 inet dhcp
# without addresses etc.!
To manually start a dhcp lookup, you can still use "sudo dhclient
eth0" similar to how pump is used AFAIK.
Ciao
--
Frank Barknecht _ ______footils.org_ __goto10.org__
Hi Dave. If you want to have a go at a "roll
your own" Gentoo style
config, I'm sending my /etc/network/interfaces file. This is from my
Debian Sarge install, set up statically (no dhcp). [snip]
Hi Nigel:
Thank you for the detailed conf file, I've saved it for future
reference if/when necessary. I did get the network up & running after
fixing /etc/network/interfaces to see eth0 at boot and running the pump
utility. Curiously, pump said it failed but brought up and connected the
interface anyway.