25 Aug
2007
25 Aug
'07
3:08 a.m.
Hello Fons,
Yeah, I can't understand what's going on. The odd thing is that I tried with
different monitors (Roland DM-20) and the signal level seems fine, a little
high but not as dramatically high as with the ADAMs... I have no idea what's
going on. I just got response from Edirol's support and their only
suggestion is to use a mixer (and the mention the +4dBu nominal output).
I'll try now contacting ADAM's support.
Cheers,
Hector
On 8/24/07, Fons Adriaensen <fons(a)kokkinizita.net> wrote:
On Fri, Aug 24, 2007 at 12:29:52PM -0400, Hector Centeno wrote:
--
===============================
http://www.hcenteno.net
... but the problem is that if I lower the volume
on the
software side and I increase the level on the monitors, then I start
hearing
a lot of noise mixed with the (now lower) sound
signal (since the analog
out
of the FA-101 is still high).
Still this is not normal. The nominal output level of the FA101 is
+4dBu, nothing special, with a S/N ratio of over 100 dB. The maximum
SPL of the ADAM A7 is somthing like 105 dB, so even if its nominal
input level is 20dB lower than the output of the FA101 the noise
level should be 25dB, which is imperceptible even in a very quiet
room.
Something is not working right here.
--
FA
Follie! Follie! Delirio vano è questo !