21 Jul
2006
21 Jul
'06
10:29 p.m.
Ground loop problem? As a test only, what happens if you unplug power
on the printer, or turn the printer off?
If it is a ground loop issue - I did hear of this recently with a USB
hard drive I think - then possibly it's a cable issue or maybe you
could stuck a USB hub in the middle to break the loop? (Just
guessing!) ;-)
On the off chance it's something more nefarious, what are the relative
IRQ priorities of the USB controller vs. the sound card? I Assume the
sound card's IRQ has a high realtime priority? If not, and it's lower
than USB, then possibly there is some strange interaction. I've never
run into anything like that with USB, but I have with other devices
like a mouse, etc.
Hope this helps. (not holding my breath!) ;-)
Cheers,
Mark
On 7/21/06, Dave Phillips <dlphillips(a)woh.rr.com> wrote:
Greetings:
I hooked up my new HP 6540 printer today, it's a beauty, but it
creates a terrible noise through my speakers when it's running. Is this
a known problem with USB devices ? Is it a mobo problem ? (This is
happening on my old 800 MHz machine.)
Short of disconnecting the cable when the printer isn't being used, is
there a solution to this trouble ?
Best,
dp