19 Jun
2006
19 Jun
'06
2:35 p.m.
Mark Knecht wrote:
On 6/19/06, yvan chenard <mte_multi(a)hotmail.com>
wrote:
The problem shouldn't be happening. The driver for the intel8x0 should
automagically route the signal from line to master out. If you run
alsamixer there might be a capture switch toggle to set or it could be a
driver bug.
What programs/mixers other than "cat" have you tried?
Cheers.
--
Patrick Shirkey - Boost Hardware Ltd.
Http://www.boosthardware.com
Http://lau.linuxaudio.org - The Linux Audio Users guide
========================================
"Anything your mind can see you can manifest physically, then it will
become reality" - Macka B
Hi, maybe someone can help me,
I find no ways to route (loop_back) the Line-in(where I have my tv-tuner
pluged in) to
the headphone jack, maybe someone know how to do it or know any links on
documentation on how to do it.
The sound card is onboard Intel D945GTP
the chipset is STAC9220 (from sigmatel) (HDA_intel compatible)
I am runing ALSA 1.0.11 not in the kernel(as module).
kernel 2.6.16.5.
The only way to get sound from LineIn to HeadPhone right now is
"cat /dev/dsp > /dev/audio", but the quality is realy bad( with this
command I know that the configuration of the input and output is OK).
Thank You for your time.
Yvan
Sort of overkill for the application but possibly run Jack and then
use QJackCtl to do your required connections?
Good luck,
Mark