11 Aug
2017
11 Aug
'17
8:52 p.m.
On Fri, 11 Aug 2017 19:53:18 +0200, Hermann Meyer wrote:
Am 10.08.2017 um 05:18 schrieb Tim:
Hi,
"The ODROID-C2 consumes less than 0.8A in most cases" -
http://odroid.com/dokuwiki/doku.php?id=en:c2_hardware
The ESI UDJ6 and ESI Maya 22 USB are bus powered, unfortunately
downloading the data sheets from the ESI homepage doesn't work for me.
"the voltage at the hub port is specified to be in the range 5.00+0.25
−0.60 V by USB 2.0"
"High-power devices draw at least 1 unit load and at most 5 unit loads
(500 mA)" - https://en.wikipedia.org/wiki/USB#USB_2.0
So IIUC required are likely around 1,5A at 5V, for at least 2 hours.
Would be a battery as recommended at
https://electronics.stackexchange.com/questions/98896/good-portable-5v-1-5a…
be sufficient?
Regards,
Ralf
Guitarix
Battery powered
2 Hr or better run time
Pocket sized
For live use
Latency <= 128 frames (at say 44.1Khz)
Here is a project which do that:
https://github.com/rabits/onebutton