4 Feb
2003
4 Feb
'03
8:08 p.m.
Felipe,
If it's ISA then I think you probably have no ability to configure the
IRQ, or at least that would be my guess. Most PCI motherboards (I assume the
machine is PCI?) save the 'good' interrupts for PCI devices. If it's not a
PCI MB, well then you really tricked me!!! ;-)
If I missed this at the early part of the thread, then I'm sorry I might
have led you down a path that won't solve your problem. I think the real
problem here is that you are trying to use a 2003 sound stack with a 1993
sound card. Even if you get it to work, you're likely going to be unhappy
with the results.
I'm willing to help you keep going if you decide to push forward.
With best regards,
Mark
-----Original Message-----
From: linux-audio-user-admin(a)music.columbia.edu
[mailto:linux-audio-user-admin@music.columbia.edu]On Behalf Of felipe
Sent: Tuesday, February 04, 2003 3:35 PM
To: linux-audio-user(a)music.columbia.edu
Subject: Re: [linux-audio-user] Uhm, low latency?
On Tuesday 04 February 2003 23:59, Mark Knecht wrote:
Humm...is this actually an ISA card? I hope
not...
Mark
LOL, yes think it's 100% ISA, as I have to enable it with isapnp
and my alsa
modules are in /lib/modules/2.4.29/kernel/sound/isa ...
Is it more difficult if it's an isa? Btw I'm going to try your
suggestions...
thanks a lot!
felipe
--
Prendi GRATIS l'email universale che... risparmia: http://www.email.it/f
Sponsor:
Viaggiare in aereo spendendo poco non è un sogno perchè Sterling
fa dei tuoi sogni realtà, clicca subito
Clicca qui: http://adv2.email.it/cgi-bin/foclick.cgi?mid=1227&d=5-2