karsten wiese <annabellesgarden(a)yahoo.de>de>:
Above error message means:
"usx2yloader can't transfer the firmware to the us122"
So it could be a USB problem. I once had such USB problem with a
VIA chipset mobo. things didn't work, until i connected my us428 to
the other USB connector.
Does
$ dmesg
say something?
Nothing very interesting. This is what comes from loading the module
and running fxload:
usbcore: registered new driver snd-usb-usx2y
usb 2-2: USB disconnect, address 23
usb 2-2: new full speed USB device using uhci_hcd and address 24
what kind of motherboard do you use?
Please post outputs of
$ lspci
The computer is an IBM ThinkPad R40. The lspci output is as follows:
0000:00:00.0 Host bridge: Intel Corporation 82845 845 (Brookdale) Chipset Host Bridge
(rev 04)
0000:00:01.0 PCI bridge: Intel Corporation 82845 845 (Brookdale) Chipset AGP Bridge (rev
04)
0000:00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB
UHCI
Controller #1 (rev 03)
0000:00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB
UHCI
Controller #2 (rev 03)
0000:00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB
UHCI
Controller #3 (rev 03)
0000:00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI
Controller
(rev 03)
0000:00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 83)
0000:00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev
03)
0000:00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 03)
0000:00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus
Controller (rev
03)
0000:00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M)
AC'97 Audio Controller (rev 03)
0000:00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97
Modem
Controller (rev 03)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M6 LY
0000:02:00.0 CardBus bridge: Texas Instruments PCI1510 PC card Cardbus Controller
0000:02:02.0 Network controller: Intel Corporation PRO/Wireless 2200BG (rev 05)
0000:02:07.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000
Controller
(PHY/Link)
0000:02:08.0 Ethernet controller: Intel Corporation 82801DB PRO/100 VE (MOB) Ethernet
Controller
(rev 83)
I hope you can make something of this.
can't ;-)
that usx2yloader error should only happen,
if something has gone to "dmesg" as well.
the chipset is not like the one, i had trouble with.
me thinks it'd be best to compile/install a recent kernel
with CONFIG_SND_DEBUG_DETECT set and check if dmesg shows
something ( like "dsp_load") then.
___________________________________________________________
Telefonate ohne weitere Kosten vom PC zum PC: