18 Dec
2017
18 Dec
'17
10:49 p.m.
On 18/12/17 17:08, Will Godfrey wrote:
On Mon, 18 Dec 2017 16:46:14 +0000
Bill Purvis <bill(a)billp.org> wrote:
The organ has
three manuals, plus a pedal board. The organist currently
says he wants three pair of
speakers - front, middle and back, and a big woofer in the centre! The
software supports an arbitrary
number of output channels, each with the option of a swell pedal to vary
the volumes. I'm currently
budgeting for 4 stereo amps to drive it all! It started out with only
two manuals, but it doesn't
cost much to add a third manual, the big problem is fitting it all into
the existing case!
Bill
--
+----------------------------------------+
| Bill Purvis |
| email: bill(a)billp.org |
+----------------------------------------+
I'm currently building a church organ, using
the GrandOrgue program to
handle the software
side of things. I'm looking for recommendations for a output device
which can handle 8 (or more)
outputs. There is no requirement for audio inputs, but that shouldn't
rule out devices with
inputs, they simply won't be used. Most of the discussions I've seen on
this list seem to be
more geared to multiple inputs rather than outputs.
I'm thinking in terms of a USB device, as most of the internal sound
cards seem to be
limited to 5 outputs. Cost is a factor, but reasonable sound quality is
required.
Anyone have any suggestions?
Thanks in advance,
Bill
Pardon my ignorance, but why do you need so many outputs?