26 Dec
2004
26 Dec
'04
2:04 p.m.
Christoph Eckert wrote:
Joe,
What is in your modules configuration file? Does Fedora use
/etc/modprobe.conf or /etc/modules.conf? Anyway, you might try defining
these two devices with aliases that set them up so the Radium comes out
as MIDI #1 and Audiophile as #2, that way any application that by
default looks to interface 1 for input won't need to be patched in
through aconnect or qjackctrl to see the Radium.
I believe snd-usb-audio supports up to 8 devices, so you should be able
to define the 2 you are using to control the order in which they appear
on your system.
Something like:
alias snd-card-0 snd-usb-audio
# M-Audio Radium 61 (see *** below)
options snd-usb-audio vid=0x763 pid=0x1110 index=1
alias snd-card-1 snd-usb-audio
# M-Audio Audiophile 2496 (see *** below)
options snd-usb-audio vid=0x763 pid=0x1110 index=2
*** note - the vid and pid above are for my midisport 2x2, but if you "cat
/proc/bus/usb/devices" you will see the vid and pid for your two devices.
Frank
I think this is
more a matter of not loading modules
(snd-seq-midi? snd-seq-midi-event?) for the Audiophile, and
letting the USB module do all the MIDI work, rather than
setting something with aconnect, but I certainly could be
wrong!
The module snd-usb-audio handles MIDI as well as audio over
USB; when you rmmod snd-usb-audio, you will not be able to
get audio over USB.
Why do you want to disable the MIDI part of it? If you do not
need it, simply don't use it.
Best regards
ce