16 Dec
2005
16 Dec
'05
1:55 p.m.
On Fri, 2005-12-16 at 11:21 -0600, Matt Kleffner wrote:
Hello,
Previously I could load the firmware onto my RME Multiface, but I
haven't used it for a few months. I recently reinstalled debian sarge
on my machine, but I can no longer get the firmware to load. I found
previous emails on this problem but I found no clear solution. I am
using a 2.6.14.3 kernel with the alsa drivers compiled as modules, and
the drivers are newer than the buggy (for RME) 1.0.8 versions. I've
also put snd_hdsp in my initrd image as mentioned in
http://lalists.stanford.edu/lad/2005/11/0149.html
The version info and error messages are listed below. Any thoughts on
what is wrong? Does the firmware and hdsploader version (1.0.9rc3)
have to match the alsa driver version (1.0.10rc1)? Did I miss a
solution on this or another list? Any help is appreciated.
try power-cycling *everything*. the computer, (including unplugging the
power cord (and battery if its a laptop), and the multiface box.
i've run into this condition once or twice, and the only solution i have
found is a complete power cycle of everything.
--p