22 Mar
2005
22 Mar
'05
3:57 p.m.
On Monday 21 Mar 2005 22:54, Dubphil wrote:
I think the limits are normally -1.0 - +1.0, this is where RED starts.
On Mon, Mar 21, 2005 at 08:35:19PM +0100, Robert
Jonsson wrote:
Ok, that is wierd. I tested now with jack_metro as signal source and it seems
to match perfectly at 0db.
Was it the Input or the Track meter that you
checked?
I checked both the input and the track meter. The track meter by
default shows the output of the track. To see the real level going into
the track either check the input meter or click the [pre] button.
So if the fact of pressing the [Pre] button and check the level of the
track is equivalent to check the level of the input.
Perhaps there is a difference on the level graduation I mean the yellow
and red zones between MuSE and Rezound...
Is there any standard about those green yellow and red zones on a vu
meter ? Or each developpers choose the way he will manage this ?
Somebody mentioned a standard long ago, don't know what it was, probably every
implementation is different ;). I'd think that red means overload for most
though.
Regards,
Robert
Regards
Philippe
--
http://spamatica.se/musicsite/