I asked this question on the ALSA user's list with no response (yet!)
Thought maybe someone on this group may have come across this.
Can't get midisport8x8 to work. I think that the firmware is not loading.
Some notes:
---
I have usbfs running (the dir is there), installed the hotplug and
fxload packages from linux-hotplug and "make install" the
midisport_firmware-0.5.
---
modprobe:
================================
# --- ALSA configuration
alias char-major-116 snd
alias char-major-14 soundcore
alias snd-card-0 snd-ice1712
alias snd-card-1 snd-usb-audio
# OSS/Free portion
alias sound-slot-0 snd-card-0
# card #1 (Delta 66)
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss
# card #2 (midipsort 8x8)
alias sound-slot-1 snd-card-1
================================
---
cat /proc/asound/cards shows just my Delta66 card.
---
cat /proc/bus/usb/devices shows just info on the two USB controllers
(as does lsusb)
---
lsmod (relevant)"
=====================================
Module Size Used by
snd_pcm_oss 54312 0
snd_mixer_oss 18432 2 snd_pcm_oss
realcap 4240 0
commoncap 4736 1 realcap
snd_seq 50576 8
snd_usb_audio 67680 0
snd_ice1712 63688 5
snd_ice17xx_ak4xxx 4224 1 snd_ice1712
snd_pcm 85128 5 snd_pcm_oss,snd_usb_audio,snd_ice1712
snd_page_alloc 11016 1 snd_pcm
snd_timer 23684 2 snd_seq,snd_pcm
snd_ak4xxx_adda 5760 2 snd_ice1712,snd_ice17xx_ak4xxx
snd_cs8427 10880 1 snd_ice1712
snd_ac97_codec 63748 1 snd_ice1712
snd_i2c 5248 2 snd_ice1712,snd_cs8427
snd_mpu401_uart 7680 1 snd_ice1712
snd_rawmidi 23076 2 snd_usb_audio,snd_mpu401_uart
snd_seq_device 8200 2 snd_seq,snd_rawmidi
snd 54532 23
snd_pcm_oss,snd_mixer_oss,snd_seq,snd_usb_audio,snd_ice1712,snd_ice17xx_ak4xxx,snd_pcm,snd_timer,snd_ak4xxx_adda,snd_cs8427,snd_ac97_codec,snd_i2c,snd_mpu401_uart,snd_rawmidi,snd_seq_device
soundcore 6496 2 snd
=====================================
Midisport does not show up anywhere. So, I fear that fxload and/or
hotplug scripts are not working.
How can I check this? And, how can I enable these to work (if this is
the problem)?
thanks much!
brad
--
________________________________
Hear us online:
www.Sonaural.com
Brad Fuller
(408) 799-6124
** Sonaural Audio Studios **
(408) 799-6123 West San Jose
(408) 799-6124 Cambrian