[LAU] ALSA ate my MIDI! (Or Something)

Hi Folks Just when I thought that everything was going well, I have hit a problem. I have disabled the hd-intel sound card on my laptop to get rid of Jack xruns - which it did. Since doing that, I have had some issues with the Alsa configuration; although I thought everything was supposed to hotplug, it appeared that Alsa was still looking for the hd-intel card. This may just be a Gentoo quirk. Alsaconf doesn't work with USB devices, which makes it pretty useless, so I had to wade through some configuration files and change lines so that that the modprobe aliases for card0 went to snd-usb-audio. With a bit more fiddling and a couple of reboots, I got audio working again with my external Behringer sound card. So far, so good. Now, for some strange reason, MIDI seems to be broken. When I plug in my Roland PC-300 MIDI controller and hook it up with Jack to a softsynth or to Rosegarden, nothing happens. I flipped the switch on the back that sets the output to go to the 'real' MIDI port rather than through the USB system, hooked it into a 'real' synth module and it worked fine. This is what my ALSA setup looks like: Advanced Linux Sound Architecture Driver Version 1.0.15 (Tue Nov 20 19:16:42 2007 UTC). /proc/asound/devices: 0: [ 0] : control 1: : sequencer 16: [ 0- 0]: digital audio playback 24: [ 0- 0]: digital audio capture 32: [ 1] : control 33: : timer 40: [ 1- 0]: raw midi /proc/asound/cards: 0 [default ]: USB-Audio - USB Audio CODEC Burr-Brown from TI USB Audio CODEC at usb-0000:00:1d.0-2, full s 1 [PC300 ]: USB-Audio - PC-300 Roland PC-300 at usb-0000:00:1d.7-3.4, full speed I dont' think that the PC-300 is broken because a) it is recognised and b) works OK when directed to its MIDI port. Although all the Jack connections LOOK correct, no MIDI data gets from the keyboard to wherever I'm sending it. (That includes doing a loopback through Jack so that the PC-300 inbound is connected to its hardware MIDI out.) My suspicion is that ALSA is to blame but how and why, I have no idea. I notice another ALSA quirk - if I fire up alsamixer, it only shows the playback channel of my USB sound device, not the capture channel. Running this with the hd-intel card, I see all channels. Ideas, anyone? Cheers M -- Matthew Smith Smiffytech - Technology Consulting & Web Application Development Business: http://www.smiffytech.com/ Personal: http://www.smiffysplace.com/ LinkedIn: http://www.linkedin.com/in/smiffy