10 Feb
2013
10 Feb
'13
10:09 p.m.
On Sun, February 10, 2013 10:30 am, Ralf Mardorf wrote:
Sometimes it's possible to unbind devices, but I
never experienced a
serious difference between a simple set up machine and a special tuned
machine:
There are some things that used to work that do not any more either
because the kernel has changed or the HW.
### http://www.mythtv.org/wiki/PCI_Latency
###
http://wiki.linuxmusicians.com/doku.php?id=system_configuration#pci_bus_lat…
Even though I have an older PC that only has PCI slots, I have found that
changing pci-bus latency has not helped. In fact it made my system a lot
less stable. I did not take the time to try smaller increments of this
setting as my machine has good performance as it is. Changing PCI_bus
latency has no effect on PCIe IFs at all as they are forced to zero in
hardware.
--
Len Ovens
www.OvenWerks.net