8 Oct
2017
8 Oct
'17
1:48 a.m.
On Sun, 8 Oct 2017, Athanasios Silis wrote:
Hi all,
I have a BCR2000 and would like to use a script to set some values on these knobs
and buttons.
amidi should be able to help me do that but I somehow cannot properly set the
name of the port in order to use it. Note, jackd server is up and running and
then I also use the "aj2midid" midi bridge to populate hw and software midi
ports
in jack,
I think in this case a2jmidid would have to be off. amidi uses alsa midi,
not jack midi so far as I know. (I could be wrong, try using the alsa
ports first)
The command I am trying to use is
amidi -p"14:0" -S <3x bytes depicting the midi CC command>
now port "14" SHOULD be the "Midi Through port as it appears in
qjackctl's "midi"
tab. I got it from
qjackctl's midi tab is jack midi ports. To see alsa midi ports look at the
alsa tab.
client 32: 'BCR2000' [type=kernel]
0 'BCR2000 MIDI 1 '
1 'BCR2000 MIDI 2 '
2 'BCR2000 MIDI 3 '
but running "amidi -p14:0 -S <hexbytes>" returns
cannot open port "14:0": No such file or directory
maybe try 32:0?
--
Len Ovens
www.ovenwerks.net