Re: [LAU] Bell characteristics (list of partials)

On Sun, Dec 11, 2011 at 10:52:31PM +0100, Julien Claassen wrote: Depends on what you consider 'basic theory'. The simple fact is that the partials of a bell sound are _not_ a simple harmonic series. In its most basic form, a bell sound will consist of five partials: 1. Nominal - this is the nominal frequency of the bell. 2. Prime - one octave below the nominal. 3. Hum - two octaves below the nominal. 4. Tierce - a minor (sometimes major) third above the prime. 5. Quint - a fifth above the prime. There will be higher components as well in many cases, in particular higher thirds and fifths, but these are never exact harmonics of the lower ones. This is a much simplified model. In most cases the two octaves are not exact (the 'hum' is usually higher) and this does not necessarily mean a bad sound. Same for the smaller intervals. The reason why inexact intervals are perfectly possible and do not produce an ugly sound is that none of these partials have significant higher harmomics - they are pure sine frequencies. So there is no beating of higher harmonics, which is what makes most detuned instruments sound bad. Except for the 'hum', these components will usually have a normal exponential decay (roughly). The 'hum' is different: it starts at low amplitude, and rises during a second or two before decaying. Ciao, -- FA Vor uns liegt ein weites Tal, die Sonne scheint - ein Glitzerstrahl. _______________________________________________ Linux-audio-user mailing list Linux-audio-user(a)lists.linuxaudio.org http://lists.linuxaudio.org/listinfo/linux-audio-user