23 Oct
2003
23 Oct
'03
7:05 a.m.
--- Anahata <anahata(a)treewind.co.uk> wrote:
On Wed, Oct 22, 2003 at 10:14:58PM -0500, Reuben Martin wrote:
First: Using an equalizer, kill all frequencies below
~600 and above
~2k. Use a graphic EQ for this. (The two values are just examples, you
can play with both frequencies to get the desired sound you're looking
for.)
Second: get a recording of the inside blank track that comes after the
last song of a noisy record. Loop this noise and mix it over top of
the song once you've done the band pass filter from step one.
That's a bit drastic for vinyl - more like an acoustically recorded
78rpm from about 1920. Those were pressed on shellac, not vinyl.
The priciple's about the same, though - add a few random background
ticks and clicks, a bit of white noise as many vinyl discs had tape
noise from the master, possibly a bit of distortion on peaks if you want
it to sound like a worn record/stylus, and also some gentle frequency
variation at 0.5 Hz (for 33 1/3 rpm) to simulate a less-than perfect
turntable or warped record.
I'm sure it can be done with Linux tools...
--
Anahata
anahata(a)treewind.co.uk Tel: 01638 720444
http://www.treewind.co.uk Mob: 07976 263827
------
I'd say its all possible with audacity:
http://audacity.sourceforge.net
Its an Multitrack-able Wave/Mp3/OGG-manipulation tool with LADSPA-support, I think.
Anyway, there are a lot of "integrated plugins" that allows what you want to do.
A real PROGRAMM can do what you want is not written, I think ... ;)
Sascha Retzki
_____________________________________________________________
Linux.Net -->Open Source to everyone
Powered by Linare Corporation
http://www.linare.com/
23 Oct
23 Oct
11:52 p.m.
New subject: [linux-audio-user] ... like an old vinyl
has anyone here seen Izotope Vinyl - its a DirectX plugin for Windoze.
has a very witty interface too - but i think cloning something like this
for the Ladspa plugin set might be in order?....especially if its not so
hard to do....
m~
Sascha Retzki wrote:
--- Anahata <anahata(a)treewind.co.uk> wrote:
On Wed, Oct 22, 2003 at 10:14:58PM -0500, Reuben Martin wrote:
--
|\ _,,,---,,_
ZZZzz /,`.-'`' -. ;-;;,_ HTTP 503: Too Busy
|,4- ) )-,_. ,\ ( `'-'
'---''(_/--' `-'\_) fL
"Do not meddle in the affairs of cats, for they are
subtle and will piss on your computer."
-- Bruce Graham
Musicians say No to RIAA Persecution and Prosecution of Music Lovers!
Sign the petition at http://www.copyleftmedia.org.uk/justsayno/
.::. www.iriXx.org .::. www.copyleftmedia.org.uk .::.
First: Using an equalizer, kill all frequencies
below ~600 and above
~2k. Use a graphic EQ for this. (The two values are just examples, you
can play with both frequencies to get the desired sound you're looking
for.)
Second: get a recording of the inside blank track that comes after the
last song of a noisy record. Loop this noise and mix it over top of
the song once you've done the band pass filter from step one.
That's a bit drastic for vinyl - more like an acoustically recorded
78rpm from about 1920. Those were pressed on shellac, not vinyl.
The priciple's about the same, though - add a few random background
ticks and clicks, a bit of white noise as many vinyl discs had tape
noise from the master, possibly a bit of distortion on peaks if you want
it to sound like a worn record/stylus, and also some gentle frequency
variation at 0.5 Hz (for 33 1/3 rpm) to simulate a less-than perfect
turntable or warped record.
I'm sure it can be done with Linux tools...
24 Oct
24 Oct
2:15 p.m.
New subject: [linux-audio-user] ... like an old vinyl
On Fri, Oct 24, 2003 at 02:52:23 +0100, iriXx wrote:
has anyone here seen Izotope Vinyl - its a DirectX
plugin for Windoze.
has a very witty interface too - but i think cloning something like this
for the Ladspa plugin set might be in order?....especially if its not so
hard to do....
Its not, ive been thinking of one for a while, but not fund the time, if
anyone else wants to implemtnent it i post my notes.
Needs a delay line, impulse generator, law buffer, a couple of simple
filters.
- Steve
7501
days inactive
7502
days old
linux-audio-user@lists.linuxaudio.org
2 comments
3 participants
participants (3)
-
iriXx -
Sascha Retzki -
Steve Harris