30 Nov
2004
30 Nov
'04
10:18 a.m.
So up till now I have recorded on my Audiophile 24/96 by doing something
simple like "arecord -D plughw:0,0".
Now I want to use envy24control to adjust the balance of the incoming
audio and record the result.
I think that the question I want to ask is: How do I connect
to the output of the "Digital Mixer" with arecord, but maybe someone
knows a better way?
AndyF.
30 Nov
30 Nov
10:37 a.m.
DJ Astroboy wrote:
So up till now I have recorded on my Audiophile 24/96
by doing something
simple like "arecord -D plughw:0,0".
Now I want to use envy24control to adjust the balance of the incoming
audio and record the result.
I think that the question I want to ask is: How do I connect
to the output of the "Digital Mixer" with arecord, but maybe someone
knows a better way?
I'm not sure you can... it's used as a hardware monitor for the I/O
channels. You can use alsamixer to manage the signal levels, or, use
something like Audacity or Ardour or Rosegarden for more recording and
mixing control.
--
Rule of Feline Frustration:
When your cat has fallen asleep on your lap and looks utterly
content and adorable, you will suddenly have to go to the
bathroom.
10:56 a.m.
On Tue, 2004-11-30 at 08:36, Brett W. McCoy wrote:
DJ Astroboy wrote:
I agree, use Ardour.
Jan
So up till now I have recorded on my Audiophile
24/96 by doing something
simple like "arecord -D plughw:0,0".
Now I want to use envy24control to adjust the balance of the incoming
audio and record the result.
I think that the question I want to ask is: How do I connect
to the output of the "Digital Mixer" with arecord, but maybe someone
knows a better way?
I'm not sure you can... it's used as a hardware monitor for the I/O
channels. You can use alsamixer to manage the signal levels, or, use
something like Audacity or Ardour or Rosegarden for more recording and
mixing control. 
1:25 p.m.
On Nov 30, 2004, at 6:17 AM, DJ Astroboy wrote:
So up till now I have recorded on my Audiophile 24/96
by doing
something simple like "arecord -D plughw:0,0".
Now I want to use envy24control to adjust the balance of the incoming
audio and record the result.
I think that the question I want to ask is: How do I connect
to the output of the "Digital Mixer" with arecord, but maybe someone
knows a better way?
The output of the digital mixer is available on my Delta 44 as the last
two
capture inputs; your Audiophile should be the same. They show up in
JACK
as 'capture_11' and 'capture_12', or I can access them via the ALSA
plugin
layer by including the following in my ~/.asoundrc:
pcm.ice1712 {
type hw
card 0
device 0
}
pcm.hardwaremixer {
type plug
ttable.0.10 1
ttable.1.11 1
slave.pcm ice1712
}
Then I can do 'arecord -f cd -t wav -D hardwaremixer out.wav' to record
the
output of the mixer.
-Sean
10 Dec
10 Dec
7:59 a.m.
Sean Bolton wrote:
On Nov 30, 2004, at 6:17 AM, DJ Astroboy wrote:
Thanks Sean, that's the perfect solution!
So up till now I have recorded on my Audiophile
24/96 by doing
something simple like "arecord -D plughw:0,0".
Now I want to use envy24control to adjust the balance of the incoming
audio and record the result.
I think that the question I want to ask is: How do I connect
to the output of the "Digital Mixer" with arecord, but maybe someone
knows a better way?
The output of the digital mixer is available on my Delta 44 as the
last two
capture inputs; your Audiophile should be the same. They show up in JACK
as 'capture_11' and 'capture_12', or I can access them via the ALSA
plugin
layer by including the following in my ~/.asoundrc:
pcm.ice1712 {
type hw
card 0
device 0
}
pcm.hardwaremixer {
type plug
ttable.0.10 1
ttable.1.11 1
slave.pcm ice1712
}
Then I can do 'arecord -f cd -t wav -D hardwaremixer out.wav' to
record the
output of the mixer.
-Sean
7084
days inactive
7094
days old
linux-audio-user@lists.linuxaudio.org
4 comments
4 participants
participants (4)
-
Brett W. McCoy -
DJ Astroboy -
Jan Depner -
Sean Bolton