21 Aug
2005
21 Aug
'05
5:53 a.m.
Hi guys,
I have a small (I hope:-) problem: my system is based on FC3
PlanetCCRMA@Home and HDSP9652.
When I start and log in all HDSP9652 channels are muted: as soon as I open
HDSPMixer all channels are set correcly (I mean i do not have to move
slides, etc...) and sounds comes out.
Does anyone know if it is possible to have all channels unmuted without
starting HDSPMixer?
Thanks!
Michele
21 Aug
21 Aug
8:13 a.m.
Michele Spinolo wrote:
Hi guys,
I have a small (I hope:-) problem: my system is based on FC3
PlanetCCRMA@Home and HDSP9652.
When I start and log in all HDSP9652 channels are muted: as soon as I open
HDSPMixer all channels are set correcly (I mean i do not have to move
slides, etc...) and sounds comes out.
Does anyone know if it is possible to have all channels unmuted without
starting HDSPMixer?
Thanks!
Michele
Did you do an
# alsactl store
with the mixer set up as you want? It will save the mixer settings in
/etc/asound.state
If you do an
# alsactl restore
you will restore those settings. You can put it into your startup scripts.
ciao
--
salvuz
POST FATA RESVRGO
Linux registered user #291700 | machine #174619
get counted on ---> http://counter.li.org/ <---
22 Aug
22 Aug
1:16 p.m.
Salvatore Di Pietro wrote on Sun, 21-Aug-2005:
Michele Spinolo wrote:
> Does anyone know if it is possible to have all channels unmuted without
> starting HDSPMixer?
# alsactl store
with the mixer set up as you want? It will save the mixer settings in
/etc/asound.state
If you do an
# alsactl restore
you will restore those settings. You can put it into your startup scripts.
Actually, the HDSP's matrix mixer state is not readable and is
cannot be saved by alsactl.
There is no good solution to doing this on the command line other than creating a script
that calls
several amixer commands. The parameters are described here:
http://www.alsa-project.org/alsa-doc/doc-php/template.php?company=RME&c…
There was work under way by someone to do an OSC controlled mixer
daemon for the HDSP, not sure of its status.
jlc
23 Aug
23 Aug
4:35 a.m.
Jesse Chappell wrote:
Salvatore Di Pietro wrote on Sun, 21-Aug-2005:
> # alsactl store
Actually, the HDSP's matrix mixer state is not
readable and is
cannot be saved by alsactl.
Whoops!
(unfortunately) Don't own a HDSP...
My fault!
--
salvuz
POST FATA RESVRGO
Linux registered user #291700 | machine #174619
get counted on ---> http://counter.li.org/ <---
5:19 a.m.
Salvatore Di Pietro wrote:
Jesse Chappell wrote:
Hi That wouldn't be a hamerfall lite then, 9632?
If so, I did the same thing!
Cheers
Bob
Salvatore Di Pietro wrote on Sun, 21-Aug-2005:
> # alsactl store
Actually, the HDSP's matrix mixer state is
not readable and is
cannot be saved by alsactl.
Whoops!
(unfortunately) Don't own a HDSP...
My fault!
6855
days inactive
6857
days old
linux-audio-user@lists.linuxaudio.org
4 comments
4 participants
participants (4)
-
Bob -
Jesse Chappell -
Michele Spinolo -
Salvatore Di Pietro