30 Oct
2003
30 Oct
'03
5:41 p.m.
I'm trying to build SpiralSynthModular on a Slackware 9.0 system. Everything seems to
go fine until I get:
/usr/local/lib/libpng.so: undefined reference to `deflate'
/usr/local/lib/libpng.so: undefined reference to `inflate'
/usr/local/lib/libpng.so: undefined reference to `inflateInit_'
/usr/local/lib/libpng.so: undefined reference to `crc32'
/usr/local/lib/libpng.so: undefined reference to `deflateInit2_'
/usr/local/lib/libpng.so: undefined reference to `inflateReset'
/usr/local/lib/libpng.so: undefined reference to `deflateReset'
/usr/local/lib/libpng.so: undefined reference to `inflateEnd'
/usr/local/lib/libpng.so: undefined reference to `deflateEnd'
collect2: ld returned 1 exit status
make: *** [spiralsynthmodular] Error 1
I downloaded, built, and installed the latest version of libpng (including the obligatory
download/build/install of the latest zlib), and ran ldconfig, but I still get this
message. I've tried building 0.2.0rc2 instead of 0.2.1, but the result is the same.
I also tried not using the --enable-jack option when "./configure"ing, with no
effect.
gcc version is 3.2.2
ld version is 2.13.90.0.18 20030121
Any suggestions?
|)
|)enji
30 Oct
30 Oct
6:02 p.m.
Hi Benji:
What does 'whereis libpng.so' report ? I'm wondering if you have
another libpng somewhere... Maybe you should check for an old zlib too...
Best,
== dp
Benjamin Flaming wrote:
I'm trying to build SpiralSynthModular on a
Slackware 9.0 system. Everything seems to go fine until I get:
/usr/local/lib/libpng.so: undefined reference to `deflate'
/usr/local/lib/libpng.so: undefined reference to `inflate'
/usr/local/lib/libpng.so: undefined reference to `inflateInit_'
/usr/local/lib/libpng.so: undefined reference to `crc32'
/usr/local/lib/libpng.so: undefined reference to `deflateInit2_'
/usr/local/lib/libpng.so: undefined reference to `inflateReset'
/usr/local/lib/libpng.so: undefined reference to `deflateReset'
/usr/local/lib/libpng.so: undefined reference to `inflateEnd'
/usr/local/lib/libpng.so: undefined reference to `deflateEnd'
collect2: ld returned 1 exit status
make: *** [spiralsynthmodular] Error 1
I downloaded, built, and installed the latest version of libpng (including the obligatory
download/build/install of the latest zlib), and ran ldconfig, but I still get this
message. I've tried building 0.2.0rc2 instead of 0.2.1, but the result is the same.
I also tried not using the --enable-jack option when "./configure"ing, with no
effect.
gcc version is 3.2.2
ld version is 2.13.90.0.18 20030121
Any suggestions?
|)
|)enji
6:51 p.m.
New subject: [linux-audio-user] Building SpiralSynthModular - undefined libpng references
On Thu, 30 Oct 2003 17:03:41 -0500
Dave Phillips <dlphilp(a)bright.net> wrote:
Hi Benji:
What does 'whereis libpng.so' report ? I'm wondering if you have
another libpng somewhere... Maybe you should check for an old zlib too...
Multiple items in /usr/* and /usr/local/* - I think you've hit the nail on the head.
Thanks!
|)
|)enji
6:11 p.m.
New subject: [linux-audio-user] Building SpiralSynthModular - undefined libpng references
I'm trying to build SpiralSynthModular on a
Slackware 9.0 system.
Everything seems to go fine until I get:
[skipped]
Any suggestions?
|)
|)enji
I had the same problem. Us i remember, it solved editing Makefiles and tell them where is
zlib.
31 Oct
31 Oct
1:57 a.m.
New subject: [linux-audio-user] Building SpiralSynthModular - undefined libpng references
At 08:44 AM 31/10/2003, Benjamin Flaming wrote:
I'm trying to build SpiralSynthModular on a
Slackware 9.0
system. Everything seems to go fine until I get:
You can grab a slackware package of 0.2.1 at http://www.audioslack.com if
you want. I didn't package it, but it should be ok. You will probably need
to use fltk 1.4.1rc1, I think that was what it was compiled for.
Luke
----------------
Luke Yelavich
AudioSlack Founder and main package maintainer
Audio software packaged for the Slackware Linux Distribution
http://www.audioslack.com
luke(a)audioslack.com
6:15 a.m.
You can actually remove the png lib from the Makefile altogether, it's not
needed any more.
I'd recommend the audioslack distribution too though, it's how I finally got a
working low latancy kernel :)
On Fri, 31 Oct 2003 16:47:36 +1100, Luke Yelavich wrote
At 08:44 AM 31/10/2003, Benjamin Flaming wrote:
................................. www.pawfal.org/nebogeo
I'm trying to build SpiralSynthModular on a
Slackware 9.0
system. Everything seems to go fine until I get:
You can grab a slackware package of 0.2.1 at
http://www.audioslack.com if you want. I didn't package it, but it
should be ok. You will probably need to use fltk 1.4.1rc1, I think
that was what it was compiled for.
Luke
----------------
Luke Yelavich
AudioSlack Founder and main package maintainer
Audio software packaged for the Slackware Linux Distribution
http://www.audioslack.com
luke(a)audioslack.com
8:39 a.m.
New subject: [linux-audio-user] Building SpiralSynthModular - undefined libpng references
At 09:14 PM 31/10/2003, Dave Griffiths wrote:
You can actually remove the png lib from the Makefile
altogether, it's not
needed any more.
Ah. Thanks for that tip. Will put it on my TODO when it comes time to do
more updates. Is there a newer version than 0.2.1 BTW?
I'd recommend the audioslack distribution too
though, it's how I finally got a
working low latancy kernel :)
Good to hear that my work is not in vain.
Luke
--
Luke Yelavich
AudioSlack Founder and head package maintainer
Audio software packaged for the Slackware Linux Distribution
http://www.audioslack.com
luke(a)audioslack.com
9:12 a.m.
On Fri, 31 Oct 2003 23:36:30 +1100, Luke Yelavich wrote
At 09:14 PM 31/10/2003, Dave Griffiths wrote:
The cvs one is almost releasable (in fact it's probably more stable than 0.2.1)
It's got alsa midi, jack support that actually works and it's a lot better
looking...
................................. www.pawfal.org/nebogeo
You can actually remove the png lib from the
Makefile altogether, it's not
needed any more.
Ah. Thanks for that tip. Will put it on my TODO when it comes time
to do more updates. Is there a newer version than 0.2.1 BTW?
10:08 a.m.
Dave Griffiths wrote:
On Fri, 31 Oct 2003 23:36:30 +1100, Luke Yelavich
wrote
Well ... still don't work for me.
I still have to edit the source to make it compile :
In SpiralSound/Plugins/JackPlugin/JackPlugin.C line 172 :
change : int JackClient::OnSRateChange(long unsigned int n, void *o)
to : int JackClient::OnSRateChange(jack_nframes_t n, void *o)
Then it compile, but never start .... no errors, nothing, just slow down
my machine.
My system, Mandrake 9.1, Jack 0.83.5
Christophe
At 09:14 PM 31/10/2003, Dave Griffiths wrote:
The cvs one is almost releasable (in fact it's probably more stable than 0.2.1)
It's got alsa midi, jack support that actually works and it's a lot better
looking...
................................. www.pawfal.org/nebogeo
You can actually remove the png lib from the
Makefile altogether, it's not
needed any more.
Ah. Thanks for that tip. Will put it on my TODO when it comes time
to do more updates. Is there a newer version than 0.2.1 BTW?
10:34 a.m.
On Fri, 31 Oct 2003 15:10:10 +0000, Vescovi Christophe wrote
hmm, try deleting the old .spiralmodular file in your home directory...
................................. www.pawfal.org/nebogeo
The cvs one is
almost releasable (in fact it's probably more stable than 0.2.1)
It's got alsa midi, jack support that actually works and it's a lot better
looking...
................................. www.pawfal.org/nebogeo
Well ... still don't work for me.
I still have to edit the source to make it compile :
In SpiralSound/Plugins/JackPlugin/JackPlugin.C line 172 :
change : int JackClient::OnSRateChange(long unsigned int n, void *o)
to : int JackClient::OnSRateChange(jack_nframes_t n, void *o)
Then it compile, but never start .... no errors, nothing, just slow
down my machine.
My system, Mandrake 9.1, Jack 0.83.5
11:10 a.m.
Dave Griffiths wrote:
On Fri, 31 Oct 2003 15:10:10 +0000, Vescovi Christophe
wrote
hmm, try deleting the old .spiralmodular file in your home directory...
................................. www.pawfal.org/nebogeo
Great !! it works !!
Thanks
Christophe
The cvs
one is almost releasable (in fact it's probably more stable than 0.2.1)
It's got alsa midi, jack support that actually works and it's a lot better
looking...
................................. www.pawfal.org/nebogeo
Well ... still don't work for me.
I still have to edit the source to make it compile :
In SpiralSound/Plugins/JackPlugin/JackPlugin.C line 172 :
change : int JackClient::OnSRateChange(long unsigned int n, void *o)
to : int JackClient::OnSRateChange(jack_nframes_t n, void *o)
Then it compile, but never start .... no errors, nothing, just slow
down my machine.
My system, Mandrake 9.1, Jack 0.83.5
7483
days inactive
7484
days old
linux-audio-user@lists.linuxaudio.org
10 comments
6 participants
participants (6)
-
Benjamin Flaming -
Dave Griffiths -
Dave Phillips -
Luke Yelavich -
Vescovi Christophe -
Руслан Исламгалиев