On Sat, 18 Jun 2016, Paul Coccoli wrote: My comments are based on the manual: https://d19ulaff0trnck.cloudfront.net/sites/default/files/downloads/3993/im… This is a midi controler and so almost everything should work with Linux. There is some bundled SW called Automap and there is no linux version of this. It would probably not work with LV2s anyway being focused on VSTs and AUs. But because that is extra sw and not part of the controller itself, it will not "get in the way". The most telling point in the maunal is the part that shows there are real MIDI ports for use on stage with HW synths... nothing that Linux and the plugin's used on Linux should have a problem with. The transport buttons can send either MMC which depending on the Linux SW may or not be supported. They can also be set to send other CC events that can be mapped to work as well. The Automap DAW control is not useful so far as I can see, even if you can get it to run in wine as it uses the old HUI format rather than the (slightly) newer and better supported MCP. It should be possible to map this device any which way you want manually. There are a set of factory templates, some of which may be useful, but if mapping manually, it is probably best to pick one template and make the SW you use work around that. Having said that, Ardour does have MIDI maps already for the 61 and 49 key versions. They rely on the Basic MIDI template to work. There is probably not a lot of editing required to make it work with the 25 (if any). -- Len Ovens www.ovenwerks.net