22 Jan
2004
22 Jan
'04
12:09 p.m.
hi,
I'm running gentoo/ppc on ibook rev 2.2
kernel 2.6.1_rc3 [including snd-powermac] and alsa-lib 1.0.1
when i compile jack I get following errors:
[snip]
checking for gethostent... yes
checking for setsockopt... yes
checking for connect... yes
checking for on_exit... yes
checking for atexit... yes
JACK will use System V shm API (shmget() and friends)
checking for capgetp in -lcap... no
configure: WARNING: *** no libcap present
configure: WARNING: *** required program md5sum not found
configure: error: *** Capabilities support not present. Run configure
again without --enable-capabilities.
. but alsa is there and gives sound, no problems there.
how to solve this?
regards
alex
22 Jan
22 Jan
12:21 p.m.
On Thu, 22 Jan 2004 17:06:42 +0100
Alexander Klosch <linux-lists(a)web.de> wrote:
hi,
I'm running gentoo/ppc on ibook rev 2.2
kernel 2.6.1_rc3 [including snd-powermac] and alsa-lib 1.0.1
when i compile jack I get following errors:
[snip]
checking for gethostent... yes
checking for setsockopt... yes
checking for connect... yes
checking for on_exit... yes
checking for atexit... yes
JACK will use System V shm API (shmget() and friends)
checking for capgetp in -lcap... no
configure: WARNING: *** no libcap present
configure: WARNING: *** required program md5sum not found
configure: error: *** Capabilities support not present. Run configure
again without --enable-capabilities.
. but alsa is there and gives sound, no problems there.
how to solve this?
by reading the error messages. It seems you want to compile jackd with
the --enable-capabilities flag set during configure.. this will not work
if you don't meet the requirements listed..
So, just follow the advice from the error message and configure without
the --enable-capabilities patch or install lipcap and md5sum..
Flo
--
http://www.soundclick.com/bands/9/florianschmidt.htm
http://www.arted.biz/mista.tapas
3:28 p.m.
I wrote:
> I'm running gentoo/ppc on ibook rev 2.2
> kernel 2.6.1_rc3 [including snd-powermac] and alsa-lib 1.0.1
> when i compile jack I get following errors:
>
> [snip]
> JACK will use System V shm API (shmget() and friends)
> checking for capgetp in -lcap... no
> configure: WARNING: *** no libcap present
> configure: WARNING: *** required program md5sum not found
> configure: error: *** Capabilities support not present. Run
> configure again without --enable-capabilities.
>
> .. but alsa is there and gives sound, no problems there.
> how to solve this?
sorry, forgot to say that both _are_ installed:
libcap 1.10
mdsum is in coreutils, it is a must-have package.
compiling without --enable-capabilities says:
[snip]
JACK will use System V shm API (shmget() and friends)
configure: WARNING: *** capabilities not enabled, stripped jackd has no
effect checking for snd_pcm_drop in -lasound... no
configure: WARNING: ALSA 0.9 support not found
checking for Pa_Initialize in -lportaudio... no
configure: error: No drivers can be built
without stripped jack still getting:
[snip]
JACK will use System V shm API (shmget() and friends)
checking for snd_pcm_drop in -lasound... no
configure: WARNING: ALSA 0.9 support not found
checking for Pa_Initialize in -lportaudio... no
configure: error: No drivers can be built
any solutions?
regards,
alex
4 p.m.
On Thu, 22 Jan 2004 20:25:34 +0100
Alexander Klosch <linux-lists(a)web.de> wrote:
sorry, forgot to say that both _are_ installed:
libcap 1.10
mdsum is in coreutils, it is a must-have package.
compiling without --enable-capabilities says:
[snip]
JACK will use System V shm API (shmget() and friends)
configure: WARNING: *** capabilities not enabled, stripped jackd has
no effect checking for snd_pcm_drop in -lasound... no
configure: WARNING: ALSA 0.9 support not found
checking for Pa_Initialize in -lportaudio... no
configure: error: No drivers can be built
without stripped jack still getting:
[snip]
JACK will use System V shm API (shmget() and friends)
checking for snd_pcm_drop in -lasound... no
configure: WARNING: ALSA 0.9 support not found
checking for Pa_Initialize in -lportaudio... no
configure: error: No drivers can be built
what's the output of
cat /proc/asound/version
?
Flo
--
http://www.soundclick.com/bands/9/florianschmidt.htm
http://www.arted.biz/mista.tapas
23 Jan
23 Jan
10:08 a.m.
On Thu, 22 Jan 2004 21:01:31 +0100
Florian Schmidt <mista.tapas(a)gmx.net> wrote:
On Thu, 22 Jan 2004 20:25:34 +0100
Alexander Klosch <linux-lists(a)web.de> wrote:
Advanced Linux Sound Architecture Driver Version 0.9.7 (Thu Sep 25
19:16:36 2003 UTC). Compiled on Apr 22 2004 for kernel 2.6.1_rc1-benh1.
.. so it seems 0.9.7 is in the kernel. so should I install alsa-lib &
alsa-utils in the same version?
regards
sorry, forgot to say that both _are_ installed:
libcap 1.10
mdsum is in coreutils, it is a must-have package.
compiling without --enable-capabilities says:
[snip]
JACK will use System V shm API (shmget() and friends)
configure: WARNING: *** capabilities not enabled, stripped jackd has
no effect checking for snd_pcm_drop in -lasound... no
configure: WARNING: ALSA 0.9 support not found
checking for Pa_Initialize in -lportaudio... no
configure: error: No drivers can be built
without stripped jack still getting:
[snip]
JACK will use System V shm API (shmget() and friends)
checking for snd_pcm_drop in -lasound... no
configure: WARNING: ALSA 0.9 support not found
checking for Pa_Initialize in -lportaudio... no
configure: error: No drivers can be built
what's the output of
cat /proc/asound/version
10:23 a.m.
On Fri, 23 Jan 2004 15:05:37 +0100
Alexander Klosch <linux-lists(a)web.de> wrote:
Advanced Linux Sound Architecture Driver Version 0.9.7 (Thu Sep 25
19:16:36 2003 UTC). Compiled on Apr 22 2004 for kernel
2.6.1_rc1-benh1.
.. so it seems 0.9.7 is in the kernel. so should I install alsa-lib &
alsa-utils in the same version?
Usually that's a good idea but shouldn't be the cause for the configure
failure.. I still wonder why the configure script doesn't find the alsa
stuff though.. did you maybe install alsa-lib to /usr/local? Have a look
at the config.log. It contains the error message which made the alsa
test fail.. which jack version btw?
Flo
--
http://www.soundclick.com/bands/9/florianschmidt.htm
http://www.arted.biz/mista.tapas
JACK will use System V shm API (shmget() and
friends)
checking for snd_pcm_drop in -lasound... no
configure: WARNING: ALSA 0.9 support not found
checking for Pa_Initialize in -lportaudio... no
configure: error: No drivers can be built
what's the output of
cat /proc/asound/version
11:47 a.m.
On Fri, 23 Jan 2004 15:25:18 +0100
Florian Schmidt <mista.tapas(a)gmx.net> wrote:
On Fri, 23 Jan 2004 15:05:37 +0100
Alexander Klosch <linux-lists(a)web.de> wrote:
Advanced Linux Sound Architecture Driver Version 0.9.7 (Thu Sep 25
19:16:36 2003 UTC). Compiled on Apr 22 2004 for kernel
2.6.1_rc1-benh1.
.. so it seems 0.9.7 is in the kernel. so should I install alsa-lib
& alsa-utils in the same version?
Usually that's a good idea but shouldn't be the cause for the
configure failure.. I still wonder why the configure script doesn't
find the alsa stuff though.. did you maybe install alsa-lib to
/usr/local? Have a look at the config.log. It contains the error
message which made the alsa test fail.. which jack version btw?
my alsa-lib 1.0.1 config log see here:
http://www.uni-weimar.de/~klosch/config.log
something strange in there for your eyes?
regards,
[alex]
JACK will use System V shm API (shmget() and
friends)
checking for snd_pcm_drop in -lasound... no
configure: WARNING: ALSA 0.9 support not found
checking for Pa_Initialize in -lportaudio... no
configure: error: No drivers can be built
what's the output of
cat /proc/asound/version 
23 Jan
23 Jan
11:38 a.m.
On 22 Jan 2004 21:00:26 -0600
"Jack O'Quin" <joq(a)io.com> wrote:
Alexander Klosch <linux-lists(a)web.de> writes:
well, it is gentoo ppc, there is just sys-libs/libcap available. maybe
its a gentoo prob. I'll write back later when I wrote to gentoo related
lists.
as seen in the post above by Benjamin Flaming md5sum missing might be a
jack configure problem when not finding libcap..
still jack configure doesn't, detect the alsa installation.
regards,
[alex]
sorry, forgot to say that both _are_ installed:
libcap 1.10
mdsum is in coreutils, it is a must-have package.
Maybe you forgot to install a -dev version of those packages? 
10:58 a.m.
On Thursday 22 January 2004 10:06 am, Alexander Klosch wrote:
configure: WARNING: *** no libcap present
configure: WARNING: *** required program md5sum not found
configure: error: *** Capabilities support not present. Run configure
again without --enable-capabilities.
Just FYI, I think the message about md5sum being "not found" is a bug in
the configure script. When I tried to "./configure --enable-capabilities"
without libcap installed, I got the same message about md5sum being "not
found". After I installed libcap, everything was fine. This doesn't explain
the other problems you're seeing, but at least it's one less dependency to
worry about.
|)
|)enji
11:54 a.m.
New subject: thread closed: was "Re: [linux-audio-user] jack compiling problems with kernel 2.6"
hi all,
thanx for your help,
it seems that the problem was a mix of gentoo, ppc and jack related
probs.
all fixed with the new 0.94.0 ebuild for gentoo.
detects libcap, detects alsa and compiles smoothly.
qjackconnect shows up possible connections and jackd seems to run fine!
thanx alot for your help.
regards
[alex]
7554
days inactive
7555
days old
linux-audio-user@lists.linuxaudio.org
10 comments
4 participants
participants (4)
-
Alexander Klosch -
Benjamin Flaming -
Florian Schmidt -
Jack O'Quin